Model H6542 Robert Sorby 8-PC Set | Grizzly G0462 instruction

H6542—Robert Sorby HSS 8-PC Turning Set If quality is king, then start bowing. Made in England, these Robert Sorby lathe tools are espe- cially for the perfectionist wood turner. Includes

3⁄4" roughing gouge, 3⁄8" & 1⁄2" spindle gouge, 3⁄8" bowl gouge, 3⁄4" standard skew, 3⁄16" diamond side cut scraper, 1" square scraper and 1⁄2" round scraper. Full size handles are 16"–19".

Figure 45. Model H6542 Robert Sorby 8-PC Set.

G9863—8-PC HSS Lathe Chisel Set

This chisel set features beautiful 8" ash handles with brass ferrules and 31⁄2" long, high speed steel blades. Chisels include: 1⁄2" parting tool,

1⁄2" straight chisel, 1⁄2" double bevel skew, 1⁄2" roundnose, 3⁄4" gouge, 3⁄8" gouge, 1⁄2" diamond point and 3⁄8" veiner. Set comes in fitted wooden case, and is very competitively priced!

Figure 46. Model G9863 8-PC Chisel Set.

H6204—Precision Drill Chuck 1⁄32"–5⁄8" x JT#3 G1676—Drill Chuck Arbor MT#2 x JT#3

The best way to bore holes with your lathe!

G0462 Wood Lathe (Mfg. Since 3/10)

H0507—20" Swan Neck Hollowing Tool H0508—24" Swan Neck Hollowing Tool

An excellent choice for blind turning or undercut- ting where reach is restricted. H0507 is designed for end grain use while H0508 (with a more sub- stantial steel cross section) is designed for both end grain and side grain (bowl) use.

Figure 47. Swan Neck Hollowing Tools.

H5954—Robert Sorby Stebcentre MT#2 Razor sharp teeth bite into the workpiece for secure operation and the spring loaded center point controls the amount of drive or slip. This pat- ented feature helps avoid the problem of "dig-in." Production turners can also load and unload their work while the lathe is still running!

Figure 48. Robert Sorby Stebcentre.

-29-