Wiring & Electrical, Wiring Safety Instructions

SECTION 8: WIRING & ELECTRICAL

These pages are current at the time of printing. However, in the spirit of improvement, we may make chang- es to the electrical systems of future machines. Study this section carefully. If there are differences between your machine and what is shown in this section, call Technical Support at (570) 546-9663 for assistance BEFORE making any changes to the wiring on your machine.

Wiring Safety Instructions

1.SHOCK HAZARD. Working on wiring that is connected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not lim- ited to severe burns, electrocution, or death. Disconnect the power from the machine before servicing electrical components!

2.MODIFICATIONS. Modifying the wiring beyond what is shown in the diagram may lead to unpredictable results, including seri- ous injury or fire. This includes the installation of unapproved aftermarket parts.

3.WIRE CONNECTIONS. All connections must be tight to prevent wires from loosening during machine operation. Double-check all wires disconnected or connected during any wiring task to ensure tight connections.

4.CIRCUIT REQUIREMENTS. You MUST fol- low the requirements at the beginning of this manual when connecting your machine to a power source.

5.WIRE/COMPONENT DAMAGE. Damaged wires or components increase the risk of seri- ous personal injury, fire, or machine damage. If you notice that any wires or components are damaged while performing a wiring task, replace those wires or components.

6.MOTOR WIRING. The motor wiring shown in these diagrams is current at the time of printing but may not match your machine. If you find this to be the case, use the wiring diagram inside the motor junction box.

7.CAPACITORS/INVERTERS. Some capaci- tors and power inverters store an electrical charge for up to 10 minutes after being dis- connected from the power source. To reduce the risk of being shocked, wait at least this long before working on capacitors.

8.EXPERIENCING DIFFICULTIES. If you are experiencing difficulties understanding the information included in this section, contact our Technical Support at (570) 546-9663.

The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com.

-34-	READ ELECTRICAL SAFETY	G0462 Wood Lathe (Mfg. Since 3/10)
	ON PAGE 34!