Grizzly G0462 owner manual Symptom Possible Cause Possible Solution

Symptom	Possible Cause		Possible Solution
Inaccurate turning	1.	Headstock and tailstock are not properly	1.	Realign the tailstock to the headstock (Page 33).
results from		aligned with each other.
one end of the
workpiece to the
other.
Can't remove	1.	Quill has not retracted all the way back into	1.	Turn the quill handwheel until it forces taper out of
tapered tool from		the tailstock.		quill.
quill.	2.	Debris was not removed from taper before	2.	Always make sure that taper surfaces are clean.
		inserting into quill.
Quill will not	1.	Keyway not aligned with the quill lock	1.	Align the quill keyway with the quill lock lever as
move forward into		lever.		shown in Figure 13, on Page 16 and slightly tighten
workpiece when				the lever to engage the keyway.
handwheel is
turned.

-32- G0462 Wood Lathe (Mfg. Since 3/10)