VCR Playbackl
Before You Begin |
| Tracking Control |
| ||
|
1Press the [VCR] button to set the remote control to operate the VCR deck.
2Turn the TV on and select the video input source connected to the
Audio system: Turn the external audio system on and select the input source connected to the
Auto Tracking
The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:
•When a tape is played for the first time.
•When the tape speed (SP, LP) changes.
•When streaks or snow appear because of scratches on the tape.
Playing a VHS Tape
1Insert a prerecorded video cassette.
If the
Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.
If a tape without a safety tab is inserted, the
If the DVD Recorder+VCR is powered on by inserting a video cassette with a safety tab, playback will not start automatically.
2Press [PLAY].
It is not necessary to select the tape speed (SP, LP) for playback. It will be automatically selected by the
Manual Tracking
If noise appears on the screen during playback, press the [TRACKING
•If vertical jitter occurs, adjust these controls very carefully.
•Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds.
3Press [STOP (■)] to stop playback.
If the tape reaches the end before [STOP] is pressed, the
44