Timer Recording
Timer Recording Troubleshooting
5Press [RED] to record.
The selected bar becomes red. It means that a timer recording is associated to that programme. Your recorder will automatically begin recording when the programme starts.
6Press [RED] once more to edit the program. The Timer Record List will appear.
7To modify the timer programme, follow steps
Cancelling a Timer Recording (EPG)
You can clear a Timer Recording any time before the recording actually starts.
•Press [TIMER] on the remote control to display the Timer Record List.
•Use […†] to select the program you want to erase on the Timer Recorder List, then press [GREEN] to cancel it.
Stopping a Timer Recording in Progress
Even if a Timer Recording is set, the
•No disc is loaded in the DVD tray when in record to DVD mode.
•A
•‘Lock Disc’ is set to YES in the DISC Operation menu; see page 56.
•There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
•A recording or playing titles is already under way.
•The start time has already passed.
•16 Timer Recordings have already been set.
If two or more Timer Recordings overlap:
•The earlier program takes priority.
•When the earlier program finishes, the later program starts.
•If two programs are set to start at exactly the same time, the program entered first takes priority.
Confirmation is not possible when:
•The ‘Lock Disc’ setting is set to YES.
•There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
Recording Priority
•Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual recording. During manual recording, Timer Recording or OTR will be ignored.
RECORDING
After a Timer Recording has started, you can still stop the program by pressing [STOP].
For more details, Refer to ‘Stopping a Timer Recording in progress’ on page 50.
It is not possible to extend the recording duration time of the timer recording set using the EPG application timer setting.
51