Step 2: Display Plate Installation
1
2
Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display.
According to the size of the display's hole, choose the corresponding screw (E/F/G) and washer (C) and insert into the hole as shown (Figure 3) and tighten.
Figure 3
Step 3: Final Installation
1Hang the display plate onto the top of the wall plate and slip it into the wall plate as shown (Figure 4).
2Tighten the safety screw on the side and back using a Phillips head screw driver and the supplied 4mm Allen Key (Figure 5 & Figure 6 respectively).
3Adjust the tension of the joint using the supplied 6mm Allen Key (Figure 7).
Figure 4
Phillips screw driver
Figure 5 | Figure 6 | Figure 7 |
Page 3