LG Electronics MT-42PZ43R, MZ-42PZ42V How to connect, Remote Control IR Code NEC Format

Page 29

IR Code (NEC Format)

How to connect

GConnect your wired remote control to the Remote port on the Monitor.

Set the CONTROL LOCK to ‘ON’ on the Monitor back panel to operate Monitor with wired remote control.

Remote Control IR Code (NEC Format)

GOutput waveform

Single pulse, modulated with 37.917KHz signal at 455KHz

GConfiguration of frame

•1st frame

Carrier frequency

FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3

Lead code

Low	High
		Data code	Data code
custom code	custom code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

•Repeat frame

Repeat code

GLead code

9 ms

GRepeat code

9 ms

GBit description

4.5 ms

0.55 ms

2.25 ms

• Bit “0”				• Bit “1”

0.56ms

1.12ms

GFrame interval : Tf

The waveform is transmitted as long as a key is depressed.

0.56 ms

2.24 ms

Tf=108ms @455KHz

Image 29

Contents Plasma Monitor Easy installation What is a Plasma Display ?Wide angle range of vision Big screenContents Do not use water the Monitor while cleaning Safety InstructionsEarth wire should be connected Do not insert any object into the exhaust ventOnly use the specified batteries Do not pull the cord but the plug when unpluggingBack Panel Controls of the MonitorFront Panel Controls Watching External Equipments Control Lock SwitchBack Panel RCA Type Scart TypeWatching VCR When the Interface board is installed External Equipment Viewing SetupsWatching Cable TV When the Interface board is installed How to connectPC Setup Connecting PCSetup Instructions to Connect a PC to your Monitor RGB1 Mode Resolution Horizontal Vertical Displayable Monitor SpecificationResolution Horizontal Vertical RGB2 Mode Resolution Horizontal VerticalInstalling Batteries Remote Control Key FunctionsControl only PIP Position change the sub picture positionOptional Extras AccessoriesDesktop Pedestal Installation Monitor Installation OptionsTurning on the Monitor power cord is still connected Turning on the Monitor just after installationTo Mount on a Wall To Install on a Desktop Turning on the MonitorPicture Menu Options Menu Language Selection optionPSM Picture Status Memory Manual Picture Control User optionAdjusting Sound Control User option AVL Auto Volume LevelerSound Menu Options SSM Sound Status MemorySpecial Menu Options Sleep TimerMenu Rotation for Vertical Viewing OrbiterChild lock Adjusting Auto Colour ControlManual Colour Temperature Control User option Adjusting Horizontal/ Vertical Position Auto Adjustment RGB1 PC mode onlyPicture Phase Adjustments RGB1 PC mode only Screen Menu OptionsScreen Adjustments Video or AV1, AV2 and S-Video mode only Initializing Reset to original factory valueSelecting Wide VGA mode RGB1, RGB2 PC mode only Split Zoom Setting Picture FormatPIP Picture-in-Picture Feature Selecting a Input Signal Source for the Twin Picture Twin Picture Setup OptionsWatching Twin Picture Selecting Twin Picture Sound OptionsType of connector D-Sub 9-pin male External Control Device SetupRS-232C configurations Set IDPower Command2a Command Reference ListInput Select Command2b Transmission / Receiving ProtocolScreen Mute Command2d Aspect Ratio Command2cVolume Mute Command2e Volume Control Command2fExternal Control Mode Command2m OSD Select Command2lPIP Position Command2q Treble Command2rRed Adjustment Command2v Colour Temperature Command2uGreen Adjustment Command2w Blue Adjustment Command2$IR Code NEC Format How to connectRemote Control IR Code NEC Format ARC Code Hexa FunctionTroubleshooting Checklist Page Page Page MT-42PZ40V/B/R/S MT-42PZ43V/B/R/S Product SpecificationsMT-42PZ41V/B/R/S MZ-42PZ42V/B/R/S MZ-42PZ43V/B/R/S