VCR SETUP
■To avoid picture noise (interference), leave an adequate distance between the VCR and TV
■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
When connecting with an antenna
T | COMPONENT IN |
ANTENNA
IN
NO)
DIO | VIDEO |
| AUDIO |
1
ANT OUT | VIDEO | L | R | |
ANT IN | OUTPUT |
|
| |
| SWITCH |
|
|
|
Wall Jack
2
CONNECTIONS & SETUP
Antenna
1. How to connect
1Connect the RF antenna out socket of the VCR to the Antenna socket on the set.
2Connect the antenna cable to the RF antenna in socket of the VCR.
2.How to use
■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
15