APPENDIX
01.Power (Command2:a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off | Data 1 : Power On |
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
*To change the Power on input the transmission more than twice.
02.Aspect Ratio (Command2:c) (Main picture size)
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
| Date 1: Normal screen (4:3) | Date 4: Zoom1 |
| Date 2: Wide screen (16:9) | Date 5: Zoom2 |
| Date 3: Horizon |
|
| Acknowledgement [c][ ][Set ID][ ][OK][Data][x] | |
| * Using the | |
| input, you select either 16:9 or 4:3 screen aspect | |
| ||
| ratio. |
|
APPENDIX |
| |
To select screen mute on/off. |
| |
| 03. Screen Mute (Command2:d) |
|
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Acknowledgement [d][ ][Set ID][ ][OK][Data][x]
04. Volume Mute (Command2:e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]
05.Volume Control (Command2:f) To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 81. Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
06.Contrast (Command2:g) To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 81.
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
07.Brightness (Command2:h) To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 81.
Acknowledgement [h][ ][Set ID][ ][OK][Data][x]
08. Color (Command2:i)
To adjust the screen color.
You can also adjust color in the Picture menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 81.
Acknowledgement [i][ ][Set ID][ ][OK][Data][x]
09. Tint (Command2:j)
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
Refer to ‘Real data mapping 1’. See page 81. Acknowledgement [j][ ][Set ID][ ][OK][Data][x]
78