SPECIAL FUNCTIONS
DVR (Digital Video Recorder)
PROGRESSING THE TIME CONTROL FUNCTION
1 | 3 | 4 |
2
1After selecting the Time control On, press the ENTER button.
■As soon as Time control starts, a progress bar indicating the current recording status is displayed in the bottom of the screen.
■Press the EXIT button to hide the ‘Progress Bar’ or press the ENTER button to display the 'Progress Bar'.
■This function is preserved even change a programme on progressing the Time control.
2When finishing the Time control function, enter the option menu and turn Time control Off.
The ‘Progress Bar’?
This function indicates a possible DVR reshowing section ,a current
1Status of current displayed video.
2Current save time.
315 minute intervals from Time contol start time. (Total - one hour).
4Indicates current Time contol position.
SPECIAL FUNCTIONS
!NOTE
G DVR (Digital Video Recorder) : A device which records and plays broadcast program contents onto a hard disk in set or SET TOP BOX.
G In order to save
G The total storage space of the
GWhen turning power on, it may take up to maximum 3 minutes to initialize the HDD.
GThe Recording function will not initiate for a
G Because an analog broadcast is transfered to a digital signal, video that contains rapid movement may show "cross stripes". This happens when the analog signal is compressed and then restored in the digital signal. The unit will attempt to reduce this excessive picture noise.
G When using the PIP/DW/POP mode, Time control is stopped.
G Time control is available in TV, AV1, AV2, Component 1/2 (480i) mode.
G Time control is not available for Audio only channels.
30