Command Reference List
|
| COMMAND1 | COMMAND2 | DATA |
| COMMAND1 | COMMAND2 | DATA | ||
|
| (Hexadecimal) |
| (Hexadecimal) | ||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
| 0 ~ 1 |
|
|
|
| 0 ~ 64 | |
01. | Power | k | a | 15. | Treble | k | r | |||
02. Aspect Ratio | k | c | G P. 78 | 16. | Bass | k | s | 0 ~ 64 | ||
03. Screen Mute | k | d | 0 ~ 1 | 17. | Balance | k | t | 0 ~ 64 | ||
04. Volume Mute | k | e | 0 ~ 1 | 18. | Color Temperature | k | u | 0 ~ 3 | ||
05. Volume Control | k | f | 0 ~ 64 | 19. | Red Adjustment | k | v | 0 ~ 50 | ||
06. Contrast | k | g | 0 ~ 64 | 20. Green Adjustment | k | w | 0 ~ 50 | |||
07. | Brightness | k | h | 0 ~ 64 | 21. | Blue Adjustment | k | $ | 0 ~ 50 | |
08. Color | k | i | 0 ~ 64 | 22. | Abnormal Status | k | z | FF | ||
09. Tint | k | j | 0 ~ 64 | 23. | Channel Tuning | m | a | G P. 80 | ||
10. | Sharpness | k | k | 0 ~ 64 | 24. | Channel Add/del | m | b | G P. 80 | |
11. | OSD Select | k | l | 0 ~ 1 | 25. Key | m | c | G P. 80 | ||
12. | Remote Control | k | m | 0 ~ 1 | 26. Auto Configure | j | u | 1 | ||
| lock mode |
|
|
|
|
|
|
|
| |
|
|
|
| 27. | Input select (Main) | x | b | G P. 80 | ||
13. | PIP/DW/POP | k | n | G P. 79 | 28. | Input select (PIP) | x | y | G P. 81 | |
14. | PIP Position | k | q | 0 ~ 3 | ||||||
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j,k,mor x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID number in Special menu. Adjustment range is 1~
99.When selecting Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal (1~
99) on menu and as Hexa decimal (0x0~ 0x63) on transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this for- mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this for- mat when receiving abnormal data from
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
APPENDIX
77