Beko 15LB250MID operating instructions Performing the initial power-on settings, TV controls

Page 12

6Performing the initial power-on settings

6.1-TV controls

6.1.1-Temporary on/off (STAND-BY)

When you press the red STANDBY button on your remote control while

your television is switched on, the sound and the picture will go off.

In the stand-by mode, the power indicator of your television will glow brighter. To switch your television

back on, either press any numeric button or PR+/PR- buttons.

Caution! If you are not going to use your television for a long time, unplug its power cable from the socket.

6.1.2-Program selection

You may switch to the previous or next program by pressing the P-/P+

buttons located on your television and your remote control. You may enter

the number of the program you would like to select using the numerical buttons. For example, to switch

to the program number 12, press respectively the numeric buttons 1 and 2 on your remote control. You can perform the program selection

also from the Program Table. See page 9 for the program table.

6.1.3-Digital TV, Analogue TV and AV Mode Selection

Press the AV button on your remote control. SOURCE menu will be displayed. Select DIGITAL, ANALOGUE or desired AV mode with Up/Down movement buttons and confirm with OK button so that your television will switch to the source you have selected.

6.1.4-Temporary sound mute (MUTE)

To temporarily mute the sound of your television, press the MUTE button on your remote control. In

that case, MUTE symbol will appear on the screen. When you press the

same button a second time, the sound will be restored. If you press the VOL+ button while in the Mute mode, the sound level is increased and the Mute function is aborted.

6.1.5-Returning to Selected Program (SWAP)

Allows you to switch between the current program you watch and the

last selected program. For example, if you change the channel to Program

11 while you were watching Program 1, press SWAP button to switch back to Program

1.Press SWAP button to switch back to Program 11 again.

PR 01 PR 11 PR 01

6.1.6-Main Menu

Press the MENU button. The Menu including all the setting menus will appear on the screen. Navigate

through the Menu titles with the Up /

Down movement buttons and press

the OK button to select the desired

menu. If you want to exit the menu in any step, or return to the previous menu while you are in a sub menu,

just press the BACK or MENU button.

MAIN MENU

PICTURE

SOUND

PROGRAM TABLE

SETUP

FEATURES

SELECT MENU

EXIT

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 15LB250MID Operating Instructions Table of Contents Cleaning the screen and cabinet Disposing of your TV at the end of service lifeSuperior features of your integrated digital television Important InformationFeatures of your new television Special FeaturesImportant Safety Instructions Power connectionsTV for the first time Never operate your Cause permanent loss of hearingProduct, then it must be connected to an earthed socket Batteries. There is the risk of explosion Connection of mains Cable Electrical Connections Powering on your device and the initial use Start Aerial connection BatteriesYour new television TV Control PanelExternal Connections External Connections TableRemote Control Digital Mode OnlyPerforming the initial power-on settings TV controlsTurning on the TV and Setting the Channels Performing Digital TuningsAutomatic Tuning of Channels and Storing in the Memory Manual tuning of channels and storing in the memoryProgram Table Digital Features Creating favorite channels listElectronic TV Guide EPG Performing Analogue Tunings Setup System Channel Fine Tuning Switching the locations of the stored channelsIf you do not know the channel number Deleting a stored channelSettings on your new television Sound Menu SettingsPicture Menu Settings Features Menu Settings Teletext Question Answer Button Reveal ClockFastext Toptext optionalPC Mode External equipment connectionConnection types for external devices Help and tips Technical specifications chart Remote control does not functionSymptoms SolutionMain UK Transmitter Stations Guarantee Television What is covered?HOW to Obtain Service Please complete the box below for ease of reference laterFAU.801
Top Page Image Contents