6.4.2.2-If you do not know the channel number
Press the MENU button. Move to the SETUP menu by pressing the down movement button in the Main
Menu and confirm your selection with
the OK button. The Setup menu is displayed. Select the system in which
you would like to make the search
from the SYSTEM tab and move to the CHANNEL tab by pressing
the down movement button. Press
OK on your remote control and
select “S” for cable channels and “C” for channels received via the aerial. Select SEARCH tab using the Up/Down movement buttons,
and scan the channels in ascending order with Right movement button
and in descending order with Left movement button. If the channel that
is found is of your liking, select the STORE tab. Then store it in the memory pressing the right or left movement buttons. Repeat the same procedure for other channels by selecting the program number of your choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections.
6.4.3-Fine Tuning
If the channel you found is not of the
desired quality, then select the FINE TUNE tab by pressing the Down movement button in the Setup menu. Using the Left/Right movement
buttons on your remote control, adjust the broadcast displayed on the screen to your desired quality. Under
normal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need it in case the television transmitters do not operate according to the standards. To store in the memory the settings you have made, select the Store tab and press the Right or Left movement button.
6.4.4-Program table
Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program table menu will be displayed.
PROGRAM TABLE |
| |
00 | 05 | 10 |
01 Channel | 06 | 11 |
02 Channel | 07 | 12 |
03 | 08 | 13 |
04 | 09 | 14 |
SKIP |
| NAME |
MOVE | DELETE | |
| SELECT | MENU BACK |
6.4.4.1-Switching the locations of the stored channels
Select the program you would like 
to relocate by pressing the Up/ 
Down or Left/Right movement
buttons. “Press the “GREEN” button. The color of the channel
name will change. Move to the other program you would like to relocate
by pressing the Up/Down or Right/ Left movement buttons. Finish the relocation process by pressing the “RED” colored confirmation button. The channel in the first program number you selected has been
moved to your second selected program number and the channels between both program numbers have been shifted to the initially selected program number. After setting is complete, press the MENU button to exit the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like to delete by pressing the Up/Down or Right/Left movement buttons while you are in the program table. “Press the “BLUE” button. You can perform the deletion process by
pressing the “RED” confirmation button or abort the process by pressing the “GREEN” button. “Once you press the “RED” button, the selected program is deleted and the following channels are transferred to previous program number. After setting is complete, press the MENU button to exit the menu.
16