6.3.5.1-Language Settings
You can select subtitle and sound language provided that the broadcast is supported for all digital broadcasting channels. Unless you make a selection, the language supported by the broadcaster will be selected automatically.
To perform language selection, select Subtitling Language 1, Subtitling Language 2, Audio Language 1, Audio Language 2 tab from the Language Settings menu by using Up/Down movement buttons and make your language selection with Left/Right movement buttons. You can also select subtitles directly by SUBT button on your remote control or make sound selection by AUDIO button.
6.3.5.2-Access Control
With this feature, you can lock the channels that are not suitable for children.
Access Control
Lock/Unlock Channels
Change PIN
Select
Back
Lock/Unlock Channels: Select Lock/ Unlock Channels tabs from Access Control menu and press OK button to confirm. All TV Channels list will be displayed; select the channel you want to lock with Up/Down movement buttons and press OK button
to confirm. x mark will be displayed at the beginning of the channel which is locked. To unlock, repeat the same steps. Select the channel to access the locked channel and enter the correct password into the displayed password screen. The channel will not be displayed unless the correct password is entered.
Note 1: To
Note 2: The password has been set as 0000 at the factory. You can change the password as you wish under Change PIN item in the Access Control menu.
6.3.5.3-User Interface Options
With this feature, you can decide whether to display in the list the channels that could not be unscrambled by the CI card installed on your television. To do this, you can select ON, OFF or AUTO options.
6.3.5.4-Timers
In this menu you can view Reminders you had entered from the EPG or change the entered Reminders.
6.3.5.5-Favourite Lists
Please see
In this menu, you can check the CI Module settings that you can attach to your television.
You can display your television’s hardware and software data under this menu.
6.4-Performing Analogue Tunings
You can either tune the programs automatically or manually and store them in your television.
6.4.1-Automatic tuning of channels and storing in the memory
Note: If your television does not receive any aerial broadcast for a period of 5 minutes, it automatically switches to the
You can tune the programs
automatically with the Autoprogram
function of your television and then
sort the channels as you desire
by means of the Program Table. Press the MENU button on your remote control. Select SETUP tab
by pressing the down movement button and confirm your selection with OK button. Setup menu is displayed. Select PROGRAM NO tab by pressing the Up/Down
14