Beko 15LB250MID External equipment connection, PC Mode, Connection types for external devices

Page 23

9External equipment connection:

You can connect various compatible audio and video devices to your television.

AV inputs: Press the AV button on your remote control. Source menu will be displayed. Here, you can select whichever input you would like.

DIGITAL: While in the AV or Analog TV modes, move onto this option and press OK button for switching to the Digital TV mode.

ANALOGUE: While in the AV or Digital TV modes, move onto this option and press OK button for switching to the Analog TV mode.

SCART : To watch the picture of the broadcast device connected to Scart1, move onto this option and press the OK button. (You can watch via this Scart if the connected device has a RGB output).

AV : To watch the picture of the broadcast device connected using the PHONO input, move onto this option and press the OK button.

PC (Optional): To be able to watch the images in PC mode, move onto this option and press the OK button.

SCART SOCKET

VCR/VCD

DVD/PVR

DECODER

CAMCORDER

VIDEO GAME

AUDIO

VIDEO

9.2-PC Mode

(Optional)

Your LCD television can also be used as a PC monitor via the VGA input.

9.1-Connection types for external devices

Your TV is equipped with 4 inputs including aerial input, which allows for the external device connection. These inputs are:

1-Aerial input

2-VGA input (optional)

3-SCART input 1

4-PHONO input

You can connect your external device supporting the suitable inputs to your TV via these inputs. By pressing the AV button on your remote control, select the external source input to which you connected your device.

9.2.1-PC Connection:

Connect the D-Sub15 connector to the PC-IN input on the rear of your television using a suitable cable (not supplied with the television). Again using a suitable cable, you can also listen to the sound from your PC by connecting the sound output of your PC to the PC AUDIO-IN input on the rear of your television.

9.2.2-Switching to the PC Mode

For your LCD-TV to switch to the monitor (PC) mode, press the AV button on your remote control. The AV menu appears on the screen. Select PC by pressing the P+/ P- movement buttons and press the OK button. You can also use the PC button on your remote control to directly switch into PC mode.

21

Image 23
Contents 15LB250MID Operating Instructions Table of Contents Important Information Cleaning the screen and cabinetDisposing of your TV at the end of service life Superior features of your integrated digital televisionSpecial Features Features of your new televisionTV for the first time Important Safety InstructionsPower connections Product, then it must be connected to an earthed socket Never operate yourCause permanent loss of hearing Batteries. There is the risk of explosion Electrical Connections Connection of mains CableBatteries Powering on your device and the initial useStart Aerial connectionExternal Connections Table Your new televisionTV Control Panel External ConnectionsDigital Mode Only Remote ControlTV controls Performing the initial power-on settingsManual tuning of channels and storing in the memory Turning on the TV and Setting the ChannelsPerforming Digital Tunings Automatic Tuning of Channels and Storing in the MemoryProgram Table Electronic TV Guide EPG Digital FeaturesCreating favorite channels list Performing Analogue Tunings Setup System Channel Deleting a stored channel Fine TuningSwitching the locations of the stored channels If you do not know the channel numberPicture Menu Settings Settings on your new televisionSound Menu Settings Features Menu Settings Teletext Toptext optional Question Answer Button RevealClock FastextConnection types for external devices PC ModeExternal equipment connection Help and tips Solution Technical specifications chartRemote control does not function SymptomsMain UK Transmitter Stations What is covered? Guarantee TelevisionPlease complete the box below for ease of reference later HOW to Obtain ServiceFAU.801