Help and tips | Beko 15LB250MID guide

9.2.3-PC Setting

Enter into the SETUP menu from the Main Menu by pressing the MENU button in the PC mode. In order to make the necessary settings in this menu, you can use the P+/P-

/-VOL/VOL+movement buttons on your remote control. You can make the following settings for your monitor in this menu.

9.2.4-HORIZONTAL POSITION:

Horizontal position setting

9.2.5-VERTICAL POSITION: Vertical position setting

9.2.6-CLOCK

This is the pixel clock frequency. User can narrow down or enlarge the display by selecting a desired value.

9.2.7-PHASE

Using the -VOL/VOL+movement buttons, you can ensure that the colors and shapes are exactly consolidated on the PC image.

9.2.8-AUTOCONFIGURATION

The most suitable geometric settings in accordance with the entry mode are configured by this function. For this operation, select the AUTOCONFIGURATION tab and press OK button. You can adjust the volume level of the source you have connected to the Audio-In input at the back of your TV by using the -VOL/VOL+buttons.

Note: In the Monitor mode, you can make the Brightness, Contrast, Sharpness, Red, Green and Blue Settings from the PICTURE menu.

9.3-Connecting a video recorder device and a digital satellite receiver

ANT IN

ANT OUT

Scart 1 TV IN/OUT

Scart 2 AUX IN

DIGITAL SATALLITE RECEIVER

ANT IN

ANT OUT

SCART Socket

VIDEO RECORDER

	ANT IN	socket
	ANT IN	SCART
		SCART

REAR OF THE TELEVISION

10 Help and tips

The television does not function

Make sure that the power cable of the television is connected to the mains and the power on-off switch is turned on.

Poor picture quality

•Is the aerial cable connected?

•If you are using a satellite aerial, has the aerial been adjusted to receive broadcast in the best way?

•Make sure that the aerial is far from devices that emit electromagnetic waves. (Neon lights, loudspeakers etc.)

•Try changing the direction of the external aerial. High buildings and mountains can cause a faded picture or ghosting (double picture).

•The picture quality can be affected when two external devices are connected. Try disconnecting one of the devices.

•Try adjusting the fine tuning.

No picture

•Is the aerial connected correctly?

•Is there any damage to the aerial cable?

•Are the plugs on the aerial cable connected correctly?

•Are you sure that you have pressed the correct button on the remote control?

No sound