Attaching Mounting Plate to Screen with VESA® 200 x 100, 120 x 180 or 200 x 200 Mounting Pattern
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.
FOR VESA® 200 x 100, 120 x 180 or 200 x 200
MOUNTING PATTERN:
Choose hole pattern as shown in detail 2 for VESA
2200 x 100, 120 x 180 or 200 x 200 mounting pattern and for fasteners to use. Attach mounting plate (B) to back of screen using four screws (F, G, J, K, or L) as shown.
NOTE: Be certain bottom flanges of mounting plate face toward bottom of screen.
*NOTE: If hole pattern is in a pocket, attach mounting plate (B) to back of screen using four M4 x 20 mm screws (G) and four retaining spacers (H) as indicated.
NOTE: If screw (J) gets less than three threads of engagement, attach mounting plate (B) to back of screen using four M6 x 20 mm screws (K). If screw (K) still gets less than three threads of engagement, use four M6 x 30 mm screws (L).
B
BOTTOM
FLANGES
SCREEN
*For screens with a |
|
hole pattern in a pocket, |
|
spacers (H) go between |
|
mounting plate (B) and | H |
screen when using |
F, G, J, K or L
screws (G). |
Mounting Patterns
VESA® 200 x 100
VESA® 120 x 180
VESA® 200 x 200
M4 x 10 mm screws (F) or
M4 x 20 screws (G) with spacer (H)
M4 x 10 mm screws (F) or
M4 x 20 screws (G) with spacer (H)
M6 x 12 mm screws (J),
M6 x 20 mm screws (K) or
M6 x 30 mm screws (L)
NOTE: Fastener selection may vary for specific screens. If you have any questions for the correct fasteners to use for your particular screen, call customer care.
DETAIL 2
7 of 36 | ISSUED: |