Connecting the TWO Units

��

Caution! When fitting the rear panel make sure it is always kept parallel to the screen. Ensure that the central opening of the curved rear panel is well aligned with the correspond- ing metal parts located in the rear of the flat panel screen: excessively forceful insertion of the curved rear panel could damage the edges of its internal openings.

Caution! Take particular care when inserting the flathead screws in their holes. Excessively forceful insertion could cause damage to the edges of the holes in the curved rear panel.

�

Fig.12

The system can be fully controlled using the supplied IR (infrared) remote control handset.

There is a single remote control for both the DigiOptic™ Image Pro- cessor and the screen; the remote control can be directed towards either unit since they are both equipped with an IR sensor.

The connection between the two units is made with a single cable containing three fibre optic cores each terminating in an LC con- nector.

The standard cable length of 20 m will be sufficient for most instal- lation requirements.

During installation of the fibre optic cable:

•The individual optical cables are delicate: always handle the main cable without touching the individual optical cables (Fig.13). Never pull the individual optical cables or connectors; if neces- sary, you may pull the main three-core cable.

Protective cap

Ferrule

Separation point

Connector

Fibre

Cable

Fig.13

•Only remove the cap protecting the connector ferrule imme- diately before inserting the connector; if the ferrule is allowed to come into contact with foreign material it may be damaged, making the connector unusable.

•Take particular care when inserting fibre optic connectors in their respective sockets on the rear panel of the DigiOptic™ Image Processor and the rear panel of the screen.

•Make sure that the single optical cables are not switched: the numbers on the cables must match the numbers on the con- nectors.

•Check that the connectors are correctly inserted.

•Make sure that the cable does not constitute an obstacle for persons moving around the room.

•Take care not to create knots in the cable; the minimum radius of bends in the cable is 2 cm.

•Prevent the cable from pulling and mechanical stress: this could cause the connectors to be pulled out and damaged.

After removing the protective caps from the fibre optic cable con- nectors and the panel connectors, insert the fibre optic connectors carefully, matching the numbers shown on each element (Fig.14). Be very carefully when handling optical fibres cable and connectors.

HTL40 specifications

The Sim2 Multimedia HTL40 is a remarkable projective display system that stands out in the realm of high-definition projection technology. As a part of Sim2's esteemed range of home theater projectors, the HTL40 is designed for cinema enthusiasts seeking a powerful and immersive viewing experience.

One of the primary features of the HTL40 is its advanced imaging technology, which employs a high-performance DLP (Digital Light Processing) engine. This engine leverages the capabilities of micro-mirrors to create stunning images with exceptional clarity, contrast, and vibrant colors. The projector boasts a native resolution of 1920x1080, delivering full HD viewing that ensures every detail is captured beautifully.

The HTL40 also incorporates Sim2's patented CHR (Color Harmony Resolution) technology. This innovation facilitates a wider color gamut and improved color accuracy, allowing users to experience images that are remarkably lifelike. The projector excels in reproducing subtle shades and vivid hues, ensuring that films and videos look their best in any lighting condition.

Another significant characteristic of the HTL40 is its impressive brightness level, reaching up to 2000 ANSI lumens. This level of brightness makes the projector suitable for various environments, including rooms with ambient light, where traditional projectors might struggle. Coupled with a high contrast ratio, the HTL40 enhances dark scenes without sacrificing detail, creating an immersive cinematic experience.

For connectivity, the HTL40 is equipped with multiple input options, including HDMI, ensuring compatibility with a range of devices, from Blu-ray players to streaming gadgets. With built-in support for 3D content, the projector is an excellent choice for those who enjoy cutting-edge entertainment technologies.

Additionally, the HTL40 is designed with user convenience in mind. It features an intuitive interface with easy-to-navigate settings, allowing users to quickly adjust picture and audio parameters. The compact and stylish design of the projector ensures it blends seamlessly into any home theater setup, while its reliable performance enhances overall viewing enjoyment.

In conclusion, the Sim2 Multimedia HTL40 combines advanced projection technologies with user-friendly design, making it a top choice for home theater aficionados. Its high-definition capabilities, superior color accuracy, and robust connectivity options position it as a leading projector in today’s competitive market, promising an unforgettable entertainment experience.