Switching on and OFF, Power-up sequence

��

5 SWITCHING ON AND OFF

The HTL40 LINK system consists of the Screen and the DigiOptic™ Image Processor (which is also the system control centre). The DigiOptical Image Processor sends commands to the screen and receives operating status information from the screen and function commands from the user.

The system can be controlled from either the remote control (via the infrared sensors on the DigiOptic™ Image Processor and on the screen) or the keypad located at the top of the LCD panel.

However, the power supply to the two units is separate.

After interconnecting the units via the fibre optic cable (see “CONNEC- TING THE TWO UNITS”) they must both be connected to the electrical mains supply.

Now proceed with the power-up procedure described below.

Power-up sequence

1)Set the LCD screen power switch at the bottom of the rear panel to “I” (ON) (Fig.16A).

2)Set the DigiOptic™ Image Processor power switch on the external power supply unit to “I” (ON) (Fig.15B).

Caution! In this phase make sure the DigiOptic™ Image Processor ON/OFF button (Fig. 16C) is in the OFF position: in this condition the indicator LEDs on the front panel of the DigiOptical™ Image Processor should not be lit.

3)Power-up of the DigiOptic™ Image Processor (Fig.16C).

4)Wait for a few seconds.

5)Power-up the system by pressing one of the number buttons 0...9 on the remote control (Fig.16D).

Caution! The power-up sequence described at points 1, 2, 3, 4 and 5 must be observed in full; otherwise the system will not initialise properly and the power-up sequence must be repeated in accordance with the proper procedure.

�

� �

			�
			��
			��
			��
			��
			��
			��
			��
			��
�		��
�		��
			��
�			��
�			��
�	�		��
�			��
�			�
			�

(Fig.16)

After a few seconds (system initialisation interval), the DigiOptical™ Image Processor and the Screen assume stand-by mode.

System status information is provided by two LEDs (green and blue) on the front panel of the DigiOptical™ Image Processor and on the rear of the screen.

Significant status signals are illustrated in Table 2.

HTL40 specifications

The Sim2 Multimedia HTL40 is a remarkable projective display system that stands out in the realm of high-definition projection technology. As a part of Sim2's esteemed range of home theater projectors, the HTL40 is designed for cinema enthusiasts seeking a powerful and immersive viewing experience.

One of the primary features of the HTL40 is its advanced imaging technology, which employs a high-performance DLP (Digital Light Processing) engine. This engine leverages the capabilities of micro-mirrors to create stunning images with exceptional clarity, contrast, and vibrant colors. The projector boasts a native resolution of 1920x1080, delivering full HD viewing that ensures every detail is captured beautifully.

The HTL40 also incorporates Sim2's patented CHR (Color Harmony Resolution) technology. This innovation facilitates a wider color gamut and improved color accuracy, allowing users to experience images that are remarkably lifelike. The projector excels in reproducing subtle shades and vivid hues, ensuring that films and videos look their best in any lighting condition.

Another significant characteristic of the HTL40 is its impressive brightness level, reaching up to 2000 ANSI lumens. This level of brightness makes the projector suitable for various environments, including rooms with ambient light, where traditional projectors might struggle. Coupled with a high contrast ratio, the HTL40 enhances dark scenes without sacrificing detail, creating an immersive cinematic experience.

For connectivity, the HTL40 is equipped with multiple input options, including HDMI, ensuring compatibility with a range of devices, from Blu-ray players to streaming gadgets. With built-in support for 3D content, the projector is an excellent choice for those who enjoy cutting-edge entertainment technologies.

Additionally, the HTL40 is designed with user convenience in mind. It features an intuitive interface with easy-to-navigate settings, allowing users to quickly adjust picture and audio parameters. The compact and stylish design of the projector ensures it blends seamlessly into any home theater setup, while its reliable performance enhances overall viewing enjoyment.

In conclusion, the Sim2 Multimedia HTL40 combines advanced projection technologies with user-friendly design, making it a top choice for home theater aficionados. Its high-definition capabilities, superior color accuracy, and robust connectivity options position it as a leading projector in today’s competitive market, promising an unforgettable entertainment experience.