Sim2 Multimedia HTL40 Do not touch internal parts of the units, Be careful with cables

Page 7

�������

• Read this manual carefully and keep it in a safe place for future consultation.

This manual contains important information on how to install

�

 

�

and use this equipment correctly. Before using the equipment,

 

read the safety prescriptions and instructions carefully. Keep the

 

manual for future consultation.

 

•Do not touch internal parts of the units.

The units contain electrical parts carrying high voltages and operating at high temperatures. Do not remove the cover from

the units, refer to qualified service personnel for all repair and

 

 

Fig.2

maintenance requirements. The warranty will be automatically

 

 

 

 

 

invalidated if the cover is removed from the units.

•

Changing the fuses.

 

 

 

• Power supply disconnect device.

 

Before changing the fuse disconnect the unit from the

 

mains power supply.

 

The device for disconnecting the units from the mains power

 

 

supply is constituted by the power cable plug. Ensure that the

 

The fuse compartment is next to the mains power connector

power cable plugs and the electrical mains socket outlets are

 

(Fig. 3). Remove fuse carrier (2) with the aid of a flat blade

easily accessible during installation operations. To disconnect the

 

screwdriver, then change fuse (3). Insert a new spare fuse (4).

units from the electric power supply, pull the plug to remove it

 

Use only T 3.15A H fuses.

 

from the socket outlet. Do not pull the power cable.

 

 

 

• Connect the unit only to the type of power supply indi-

 

�

 

cated.

 

�����

 

Connect the units to a mains electrical supply with rated voltage of

 

���������

 

between 120-240 Vac, 50/60 Hz and equipped with a protective

 

 

 

earth connection. If you are unsure of the type of mains power

 

�

 

supply in your home, consult a qualified electrician. Ensure that

 

�

the power draw of the units is commensurate with the rating of

 

 

the electrical socket outlets and any extension cables that are

 

 

�

used. For the DigiOptic™ Image Processor use exclusively the

 

 

power supply unit provided or an alternative power supply unit

 

 

 

expressly approved by SIM2.

 

 

 

• Connection of the units to the mains power supply.

 

Make the connection as shown in Fig.1. Before connecting the

 

panel to the electrical mains supply, follow the setup instructions

Fig.3

carefully.

 

 

• Be careful with cables.

 

Position the power supply cables so that they do not constitute

 

an obstruction.

 

Keep cables out of the reach of small children.

 

Install the units as close as possible to the wall electrical socket

 

outlet. Do not tread on the power cables, make sure that they

 

are not tangled or pulled; do not expose the power cables to

 

heat sources; make sure that the power cables do not become

 

knotted or kinked. If the power cables become damaged, stop

 

using the system and request the assistance of an authorised

 

technician.

Fig.1 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HTL40 Link Backlight Introduction LLC Lamp Warning Important Safety InstructionsClass 1 Laser Product Digioptic Image Processor Parts List ScreenDo not touch internal parts of the units Connection of the units to the mains power supplyBe careful with cables Do not insert objects through the openings in the unit Prevent the units from overheatingNever look directly at the projection lamp Position the unit on a stable surfaceUnpacking Pack Contents Positioning the screen unit InstallationPositioning the TWO Units Positioning the DigiOptic Image ProcessorProtective Cap Tabletop Installation with Support Base Optional Connecting the TWO Units Component / Rgbs 6 7 8 Connecting the Video SourcesVideo 1 2 Video 4Control RS232 Graphics RGB 10DVI-D HdmiHdtv receiver Power-up sequence Switching on and OFFSwitching on and OFF from Stand by Auto Remote ControlKeypad MenuInputs ON-SCREEN MenuMain Menu Colour PictureBrightness ContrastVideo Type Sharpness ModeCinema Mode FilterGamma Correction Colour TemperatureFREQUENCY/PHASE DelayTest Patterns SetupPower on Initial SettingsOSD Background Text InsertF1-F2 Keys Source InformationImage Picture OSD TimeoutOSD Position MemoriesRename Memories Restore MemoriesRestore Current Values Recall MemoriesTroubleshooting Guide Cleaning and MaintenanceGraphic image with poor quality vertical detail Optional AccessoriesRemote control not working Use only original or SIM2 Multimedia approved accessoriesDigioptic Image Processor Technical SpecificationsAdditional Information ScreenLink cable VGA, SVGA, XGA, SXGA, UxgaDimensions Screen On Screen Menu Layout Page Page Keypad Remote Control On Screen Menus Introduction Important Safety Instructions UnpackingInstallation Switching on and OFFSIM2 Multimedia è certificata

HTL40 specifications

The Sim2 Multimedia HTL40 is a remarkable projective display system that stands out in the realm of high-definition projection technology. As a part of Sim2's esteemed range of home theater projectors, the HTL40 is designed for cinema enthusiasts seeking a powerful and immersive viewing experience.

One of the primary features of the HTL40 is its advanced imaging technology, which employs a high-performance DLP (Digital Light Processing) engine. This engine leverages the capabilities of micro-mirrors to create stunning images with exceptional clarity, contrast, and vibrant colors. The projector boasts a native resolution of 1920x1080, delivering full HD viewing that ensures every detail is captured beautifully.

The HTL40 also incorporates Sim2's patented CHR (Color Harmony Resolution) technology. This innovation facilitates a wider color gamut and improved color accuracy, allowing users to experience images that are remarkably lifelike. The projector excels in reproducing subtle shades and vivid hues, ensuring that films and videos look their best in any lighting condition.

Another significant characteristic of the HTL40 is its impressive brightness level, reaching up to 2000 ANSI lumens. This level of brightness makes the projector suitable for various environments, including rooms with ambient light, where traditional projectors might struggle. Coupled with a high contrast ratio, the HTL40 enhances dark scenes without sacrificing detail, creating an immersive cinematic experience.

For connectivity, the HTL40 is equipped with multiple input options, including HDMI, ensuring compatibility with a range of devices, from Blu-ray players to streaming gadgets. With built-in support for 3D content, the projector is an excellent choice for those who enjoy cutting-edge entertainment technologies.

Additionally, the HTL40 is designed with user convenience in mind. It features an intuitive interface with easy-to-navigate settings, allowing users to quickly adjust picture and audio parameters. The compact and stylish design of the projector ensures it blends seamlessly into any home theater setup, while its reliable performance enhances overall viewing enjoyment.

In conclusion, the Sim2 Multimedia HTL40 combines advanced projection technologies with user-friendly design, making it a top choice for home theater aficionados. Its high-definition capabilities, superior color accuracy, and robust connectivity options position it as a leading projector in today’s competitive market, promising an unforgettable entertainment experience.
Top Page Image Contents