Graphics RGB 10, Dvi-D, Hdmi, Control RS232

��

H and V inputs. When connecting the three sets of RCA connectors use the colours as a guide: connector R is red, G is green, B is blue, H/HV is white and V is black.

By using a suitable SCART to RCA (or BNC) connector adapter cable, an RGB video signal from a source equipped with an SCART connector can be connected to this input.

Component signals are connected to inputs Y, Cr and Cb, taking care to observe the correspondence with the outputs on the source. Since the latter can be labelled in various ways, refer to Table 1 to establish the correspondence between the various signals. The con- nector colours can also be of help, as shown in the table.

Input 5 can receive RGB and YCrCb signals not higher than 32 kHz. In effect, to provide high picture quality even with relatively inac- curate sources, the input signal is processed by specific circuits in the DigiOptic™ Image Processor.

The video signals that can be connected to inputs 6-7-8 can have horizontal scanning frequencies of 15 kHz (standard video resolu- tion), 32 kHz, or higher (progressive scanning video, high definition video).

Some sources provide the facility to choose between a progressive signal or an interlaced signal. Although in general a progressive signal is higher quality than an interlaced signal, it is often prefer- able to perform the deinterlacing operation on the HTL40 LINK system rather than on the source because the HTL40 LINK system is equipped with Faroudja’s sophisticated directional correlation deinterlacing technology (DCDi™).

Progressive signals usually provide better quality than interlaced signals, but if the source features both progressive and deinter- laced signal outputs it is good practice to compare the quality of the pictures reproduced by the HTL40 LINK system in the two cases: deinterlacing performed by the HTL40 LINK system (thanks to Faroudja DCDi™ technology) is often more effective than that performed at the source (typically a DVD player).

GRAPHICS RGB 10 11

This input should be connected to an RGB-type video or graphic signal using a cable with a DB15HD type connector.

The signal source device (typically a personal computer or game console) must be able to provide separate H/V synchronisation or composite H+V synchronisation.

The video or graphic signals that can be connected to this input can have horizontal scan frequencies (H-sync) of between 32 and 80 kHz and a vertical frequency (V-sync) of between 48 and 100 Hz. Image resolution can vary between 640x480 and 1600x1200 pixels (VGA, SVGA, XGA, SXGA, UXGA).

DVI-D 12

This input provides the facility to exploit the quality of the digital image to its best advantage. If the source is equipped with a DVI-D, YCrCb or RGB output, connect it to this input to get the most out of your HTL40 LINK system.

HDMI

This input provides the facility to integrate the excellent quality of a digital image with a multichannel audio signal.

In fact the High Definition Multimedia Interface (HDMI™) com- bines the uncompressed high definition video signal with a multi- channel audio signal.

In addition, the interface enables control data to be exchanged between the video source and the HT system in order to optimise the displayed picture.

The HDMI™ input makes it possible to connect to video sources that use the High-Bandwidth Digital Content Protection protocol (HDCP) to protect their contents. This is possible because the HDCP protocol forms part of the definition of HDMI™ technology.

Once the video source has been connected to the HDMI™ in- put, the internal processing performed by the DigiOptic™ Image Processor separates the video and audio information. The audio information is made available on a digital output with a female TOSLINK connector in compliance with the S/PDIF standard.

CONTROL (RS232)

The system can be controlled via a personal computer or home automation systems by means of the serial port: simply connect this input via a serial cable from an RS232 serial port. On request, SIM2 will send you a document containing the serial port settings and a list of the main commands.

HTL40 specifications

The Sim2 Multimedia HTL40 is a remarkable projective display system that stands out in the realm of high-definition projection technology. As a part of Sim2's esteemed range of home theater projectors, the HTL40 is designed for cinema enthusiasts seeking a powerful and immersive viewing experience.

One of the primary features of the HTL40 is its advanced imaging technology, which employs a high-performance DLP (Digital Light Processing) engine. This engine leverages the capabilities of micro-mirrors to create stunning images with exceptional clarity, contrast, and vibrant colors. The projector boasts a native resolution of 1920x1080, delivering full HD viewing that ensures every detail is captured beautifully.

The HTL40 also incorporates Sim2's patented CHR (Color Harmony Resolution) technology. This innovation facilitates a wider color gamut and improved color accuracy, allowing users to experience images that are remarkably lifelike. The projector excels in reproducing subtle shades and vivid hues, ensuring that films and videos look their best in any lighting condition.

Another significant characteristic of the HTL40 is its impressive brightness level, reaching up to 2000 ANSI lumens. This level of brightness makes the projector suitable for various environments, including rooms with ambient light, where traditional projectors might struggle. Coupled with a high contrast ratio, the HTL40 enhances dark scenes without sacrificing detail, creating an immersive cinematic experience.

For connectivity, the HTL40 is equipped with multiple input options, including HDMI, ensuring compatibility with a range of devices, from Blu-ray players to streaming gadgets. With built-in support for 3D content, the projector is an excellent choice for those who enjoy cutting-edge entertainment technologies.

Additionally, the HTL40 is designed with user convenience in mind. It features an intuitive interface with easy-to-navigate settings, allowing users to quickly adjust picture and audio parameters. The compact and stylish design of the projector ensures it blends seamlessly into any home theater setup, while its reliable performance enhances overall viewing enjoyment.

In conclusion, the Sim2 Multimedia HTL40 combines advanced projection technologies with user-friendly design, making it a top choice for home theater aficionados. Its high-definition capabilities, superior color accuracy, and robust connectivity options position it as a leading projector in today’s competitive market, promising an unforgettable entertainment experience.