Weslo E320VA user manual For Cable or Satellite Boxes with DVI

VIZIO 60HZ E SERIES User Manual

For Cable or Satellite Boxes with DVI:

1.Turn off the power to the LCD HDTV and HDTV Set-Top Box.

2.Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI2 Input at the side of the LCD HDTV.

3.Using an audio cable (1/8’ stereo connector on the going into the TV), connect the cable to the audio output connectors associated with the DVI output on your HDTV Set-Top Box and connect the other end to the audio

associated with the RGB input at the rear of the LCD HDTV.

4.Turn on the power to the LCD HDTV and HDTV Set-Top Box.

5.Select HDMI2 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the HDMI button on the Remote Control.

Note:

•The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.

•If you are already using the HDMI2 input for another component, or you do not want to use the HDMI2 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI1, HDMI3 or HDMI4 connection. The LCD TV will recognize the DVI connection and obtain audio information from the audio connectors on the rear of the TV.

•Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.

	17
Version 3/17/2010	www.VIZIO.com