VIZIO 60HZ E SERIES User Manual
Connecting an external Receiver/Amp
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical SPDIF OUT at the rear of the TV. This is active when receiving audio with the programs being viewed no matter what input is being used.
1.Turn off the power to the HDTV and Receiver/Amp.
2.Using an audio cable (optical cable), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the SPDIF OUT audio optical connector at the rear of the LCD HDTV.
3.Turn on the power to the HDTV and Receiver/Amp.
4.Then press the MENU/OK button on the remote control to bring up the
5.Press any navigation arrow button on the remote control to select the Audio menu.
6.Press MENU/OK button on the remote control to enter the Audio
7.Press MENU/OK button to select Off so that the sound from the TV will now be routed through your Receiver/Amp system.
8.Press EXIT key to exit the menu display.
Note:
•Refer to your Receiver/Amp user manual to select the corresponding audio input.
•The audio output is not amplified and cannot be connected directly to external speakers.
| 24 |
Version 3/17/2010 | www.VIZIO.com |