VIZIO 60HZ E SERIES User Manual
Preparing your LCD HDTV for Wall Mounting
Your VIZIO HDTV can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the TV on the wall, please follow the instructions below for removing the stand.
To remove the base stand:
5.Unplug all cables from the HDTV.
6.Place your HDTV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
7.Remove the total of eight (4) screws holding the base stand to the TV.
8.Carefully remove the stand, pulling the base towards you.
The TV can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang your TV.
The pitch of the mounting holes is 200mm horizontally and 200mm vertically.
The screw type required is metric M6, .8mm pitch. The length of the screws will depend on the thickness plate being attached to the TV.
To find the perfect mount for your HDTV, browse VIZIO’s certified mount selection at www.VIZIO.com or call directly
| 9 |
Version 3/17/2010 | www.VIZIO.com |