Unisen LT-40153, LT-52153, LT-46249, LT-46151, LT-40151, LT-52249, LT-52151, LT-46153 manual Adjust

to highlight an option. to adjust.

4. TV Menus 41

Adjust

Assign names to TV inputs before making video adjustments (New Device Found or Inputs > Name menu). Adjustments will be

Picture reset to the defaults if you name or rename inputs afterwards. To make picture adjust-

ments:

•From the Adjust > Picture menu:

1. Press

2. Press

•While watching TV: Press the MORE key and then

8 (VIDEO) in the on-screen menu. Press to select the video option you want to change. Press

to change settings.

Note: Changing Picture settings from the default val- ues used in Home mode may increase energy use above ENERGY STAR® guidelines.

	Brilliant	For use under bright light; unavailable when the current		Set the Picture Mode first
		input is named Game or PC. When Picture Mode is Bril-		before changing other video
		liant, energy use is greater than ENERGY STAR® guidelines.		settings, as some settings are
				stored independently for each
	Game	Optimizes picture and video processing for gaming
				Picture Mode. Use Picture
		consoles. Available only when the name of the input is
				Modes to get the best image
Picture		Game or PC.
				under different viewing condi-
Mode	Bright	For most daytime viewing and x.v.Color sources
				tions.
	Natural	For most nighttime viewing and x.v.Color sources
	Special	Advanced Picture Modes. Contact your professional installer for setup or see page 45.
		151, 153 series: Special/ADV
	ISF Day,
		249 series: ISF Day/ADV1, ISF Night/ADV2
	ISF Night
	• Low contrast shows a variety of shades in darker images		Adjusts the white-to-black level
	• In most home lighting situations, medium contrast looks best.		Settings are stored indepen-
Contrast	• High contrast shows darker images more uniformly black and		dently for each Picture Mode.
	makes colors appear more vibrant. High contrast is good for
	brightly lit environments.
Brightness	Adjusts overall picture brightness. Settings are stored independently for each Picture Mode.
Color	Adjusts overall color intensity from no color to fully saturated.
Tint	Adjusts the red-to-green ratio.
Sharpness	Adjusts picture detail and clarity.
	High	Gives white images a cool cast. May provide the most		Adjusts the white balance.
Color		realistic picture under bright lighting.		Settings are stored indepen-
				dently for each Picture Mode.
	Low	Gives white images a warm cast. Natural/Color Temp
Temp
		at the low setting displays video at approximately the
		6500K industry standard for NTSC pictures.
	High,	Reduces minor noise (graininess) in the picture. Saved by input. This adjustment is not
Video	Medium,	available if the current input is named PC or Game.
Noise	Low, Off	Use High with poor-quality signals. Use Medium for moderate noise reduction. Use Low
		with good-quality signals. Use Off to leave the picture unaltered.
SharpEdge	On, Off	SharpEdge™ adds special edge enhancements to make the image appear sharper.
		Saved by input.
DeepField	On, Off	153, 249 Series. DeepField™ Imager dynamically enhances black levels in portions of
		the screen to provide strong contrast with detail over mixed screen content.
Imager
	Demo	For comparison, displays a split picture to show On (right side) and Off (left side).
Backlight	Adjusts peak brightness of the backlight. Press ENTER to turn off the backlight.

Downloaded From TV-Manual.com Manuals