Unisen LT-46249, LT-52153, LT-40153, LT-46151, LT-40151, LT-52249, LT-52151, LT-46153 manual Inputs, Avr

504. TV Menus

Inputs

Name	Cablebox, Cam(corder), CD, DVD
	(DVD, DVD2, Blu-ray), DVR, Game
	(Game, PS, Xbox, Wii), MP3 Player,
	PC, Satellite, VCR, AVR
	Delete (deactivated HDMI only)
	On/Off (Ant only)

•Lets you assign or change names of inputs appearing in the Activity menu.

-- Press to move between inputs.

-- Press to select a name.

-- You cannot change the name of the current input; you must first switch to another input. If you have only one input, such as a cable box, make sure the Ant input is On and switch to Antenna in the Activity menu before renaming the single input.

•Lets you turn the Ant input On/Off (to display/hide it in the Activ- ity menu).

•Lets you delete unused HDMI inputs from the Activity menu.

•A CEC-enabled tuner can be named either Cable Box or

Satellite.

•A CEC-enabled DVD player can be named DVD, DVD2, or

Blu-ray.

General Notes

When you change an input name in the Name menu and then exit the Name menu:

•The name is changed

•The icon in the Activity menu is changed

•Audio and video settings are changed to the defaults for the new device type.

•153 and 249 Series: All previous NetCommand IR “learning” for the input is erased.

Notes for HDMI devices

•Disconnecting an HDMI device: When you disconnect an HDMI device, the icon remains in the Activity menu until you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input.

•If the New Device Found screen does not display as expected when you connect an HDMI device, see the reset instructions under “Reactivating Auto Sensing for an HDMI Input,” page 13.

•HDMI Control and CEC-Enabled Devices: See Appendix B, “HDMI Control of CEC Devices,” page 75.

•If case of CEC conflicts: Turn off CEC signals in one of these ways:

-- Turn off the TV’s HDMI Control signals to the device (see below for HDMI Control). -- Turn off each device’s internal CEC capability.

See Appendix B for the TV’s HDMI Control or, to turn on/off a specific device’s response to CEC signals, see the device owner’s manual.

Learn	153 and 249 Series
	Sets up or changes NetCommand IR control of the current viewing device.
	See “About NetCommand IR Control,” page 55.
AVR	153 and 249 Series
	Sets up or changes NetCommand IR control of an A/V receiver.
	See “NetCommand IR Control of an A/V Receiver” on page 61.

HDMI Control On, Off

Select On or Off to enable or disable the TV’s control of a CEC-enabled device. See Appendix B for use of this feature.

Activity	•	Lets you customize the Activity menu choices for the current input.
	• Highlight the activity name and press ENTER to make changes.
	•	See “How is the Activity Menu Generated?” on the opposite page.

Downloaded From TV-Manual.com Manuals