Unisen LT-40153 Appendix E Troubleshooting, TV Reset Comparison Guide, Service, Customer Support

Appendices81

Appendix E: Troubleshooting

TV Reset Comparison Guide

You can resolve many common TV problems using the reset functions described in the following table. See also the troubleshooting suggestions later in this appendix.

IMPORTANT

Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel

(a channel from the ANT input, a cable box, or satellite receiver), first check other channels from the same input before changing settings. If most other channels from the same input seem correct, there is likely a problem with the broadcast rather than with the TV. Use care in this case, as changes you make to fix problems on individual channels also affect all other channels on the same input.

Reset Name	When to Use	How to Use		Resulting Action
Format	When the picture	Press the MORE key and then repeat-		The last-used format for a signal
	shape seems	edly press 0 (FORMAT) to cycle		type is memorized for each
	incorrect, use	through the available aspect ratios.		input. The next time the same
	MORE > 0 (FORMAT) to			input and the same signal type is
	change the shape of			viewed, the last-used format will
	the picture.			be recalled.
PerfectColor™	When the color	1.	While viewing the input to	All PerfectColor/PerfecTint
Reset	intensities seem out		be reset, press MENU and	sliders are reset to the
or	of balance, use the		go to Adjust > Picture+ >	original center position. The
PerfectColor™/	PerfectColor/PerfecTint		PerfectColor.	PefectColor/PerfecTint settings
PerfecTint™	reset to reset the color	2.	Press ENTER to display the	for other inputs remain
Reset (153 and	balances to the original			unchanged.
			PerfectColor adjustment screen.
249 Series)	factory settings.	3. Press CANCEL to reset the colors.
(for the single	Both PerfectColor and
input currently	PerfecTint are reset at
being watched)	the same time.
A/V Memory	When audio and/	1. While viewing the input to reset,		All Audio and Video settings
Reset	or video settings for		press MENU and go to Adjust >	for the individual input are
(for the single	a single input seem		Reset.	reset except for the Listen To,
input currently	incorrect, use A/V	2. Press ENTER to highlight the		Language, audio Balance,
being watched)	Memory Reset to return			Closed Caption, and Advanced
	the input to the original		Reset icon.	Picture settings.
		3. Press ENTER again to reset.
	factory settings.
A/V Reset	To reset audio and	While viewing the TV, press the		All Audio and Video settings are
(for all inputs)	video adjustments for	control-panel buttons ACTIVITY and		returned to the original factory
	all inputs to the original	VOLUME DOWN at the same time for at		settings, including Listen To,
	factory settings.	least two seconds.		Language, audio Balance,
				Closed Captions, and Format.

Service and Customer Support

Service

If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or Mitsubishi Consumer Relations at (800) 332-2119.

•DO NOT adjust any controls other than those described in this Owner’s Guide.

•DO NOT remove the protective back cover of your TV.

Customer Support

•To order replacement or additional remote con- trols or to purchase an IR emitter cable, visit our website at www.mitsuparts.com or call

(800)553-7278.

•For questions:

Call Consumer Relations at 800-332-2119. E-mail: MDEAservice@mdea.com Website: www.mitsubishi-tv.com

•249 Series. If you are having difficulty with your VUDU account, contact VUDU Customer Care at www.VUDU.com/support.

Downloaded From TV-Manual.com Manuals