Unisen LT-40151, LT-52153, LT-40153 Hdmi Control of an Hdmi A/V Receiver and Connected Devices

76Appendices

HDMI Control of an HDMI A/V Receiver and Connected Devices

Note: Connect the A/V receiver to the TV with an HDMI cable before making other connections.

1.	Enable HDMI Control for the A/V receiver as
	described in “Enabling HDMI Control of CEC
	Devices” on the previous page.
2.	Power on the HDMI device you wish to connect to
	the A/V receiver (such as a disc player, cable box,
	or satellite receiver). Allow the device to complete
	the power-on sequence (boot up). Stop playback if
	the device starts playing.
3.	Connect the device to the A/V receiver with an
	HDMI cable.
4.	Select the device’s HDMI input on the A/V receiv-
	er’s front panel controls or remote control.

AVR AUDIO OUTPUT

R L

TV	Optional
HDMI cable	digital audio
	cable

A/V receiver

with HDMI

output

5. When the TV detects the connection, the New

Device Found screen will appear.

Note: If the TV is unable to detect the device, either the device’s CEC capability is not enabled or the device is not CEC compatible. Enable HDMI control through the device’s menus before continuing. You may need to temporar- ily connect the device directly to the TV to view device menus.

HDMI OUT L R

ANALOG AUDIO IN

HDMI cables

High-definition

DVD player

Cable box

DIGITAL

AUDIO IN

VCR

DVD player

6.Highlight On.

7.Highlight EXIT and press ENTER to close the New Device Found screen.

8.Optional: Connect the TV’s DIGITAL AUDIO OUTPUT to an input on the A/V receiver. Use this additional connection if:

•You want the ability to switch between the A/V receiver speakers and the TV speakers.

•You want to use the A/V receiver to listen to devices connected to the TV only, e.g., an antenna input or camcorder.

9.153 Series. If desired, perform NetCommand IR Learning to supplement CEC functions. You must first connect and place IR emitters for the devices. See page 55.

Connecting HDMI devices. The optional digital audio connection allows you to hear audio through the A/V receiver from devices connected to the TV only.

Downloaded From TV-Manual.com Manuals