Unisen LT-46249, LT-52153, LT-40153, LT-46151, LT-40151, LT-52249, LT-52151 From the Adjust Audio menu

424. TV Menus

Adjust, continued

To make audio adjustments:

•From the Adjust > Audio menu:

Audio	1.	Press	to highlight an option
	2.	Press	to adjust.

•While watching TV: Press the MORE key and then

9 (AUDIO) in the on-screen menu. Press to

select the audio option you want to change. Press to change settings.

Speakers	The Speakers option displays only if an A/V receiver or headphone connection has been
	detected. Detection occurs on the right AVR AUDIO OUTPUT jack or the DIGITAL AUDIO OUT jack.
	An A/V receiver can also be detected on an HDMI jack.
	TV	Turns on the internal TV speakers.
	AV Receiver Turns off the TV speakers so you hear sound only from a connected A/V receiver.
		Note: When you disconnect an analog A/V receiver, be sure to change the
		Speakers setting to TV to hear sound from the TV speakers.
	Headphones Turns off the TV speakers so you hear sound only from connected headphones.
		See page 18. This option is not available if DIGITAL AUDIO OUTPUT is connected.
		The Subwoofer option displays only if a subwoofer connection has been identi-
Subwoofer	Off, On	fied on the SUBWOOFER OUTPUT jack. The setting you select is applied to all TV
		inputs.
		Use Off to turn off audio to a connected subwoofer.
	[Subwoofer	To adjust the subwoofer volume level, highlight Subwoofer and press ENTER to
	level adjust-
		display an adjustment slider.
	ment]
Bass	Controls volume of low-pitched sound from the TV speakers.
Treble	Controls volume of high-pitched sound from the TV speakers.
Balance	Controls audio balance between the left and right TV speakers; available only when Sound Mode
	is Stereo.
Sound Mode	Stereo	No special audio effects from the TV speakers; monaural programs are played as
		mono, stereo and surround sound are played as stereo.
	Surround	• Programs with surround sound are played with Sound Projector surround
		sound.
		• Other audio is modified:
		-- For monaural (non-stereo) programs, creates a simulated stereo effect.
		-- For stereo programs, creates a simulated surround sound effect.
	Music	153 and 249 Series. Optimizes Sound Projector speakers for music listening.
	Night	Directs sound to a specific area to lessen the disturbance to others outside the
		room. Settings are reset to the default when you power down the TV.
		1. Position yourself in the seating area.
		2. Press ENTER to display an adjustment slider.
		3. Press	to adjust the direction of the sound beams until sound seems the
		loudest.

Downloaded From TV-Manual.com Manuals