Unisen LT-52153, LT-40153, LT-46249, LT-46151, LT-40151, LT-52249, LT-52151, LT-46153 DVD Input key

646. NetCommand Control of an A/V Receiver

Setting Up A/V Receiver Control, continued

Case 2: Automatic A/V Receiver Switching to a Surround Sound Device

Note: Use this setup to send digital surround sound from a source device directly to your external sound system. For non-surround sound source devices, Mitsubishi recommends using the setup for Case 1, in which audio is sent through the TV.

A device can send digital surround sound such as Dolby Digital or DTS directly to the A/V receiver. The device might be a DVD player, cable box, or satellite receiver, and could have HDMI output. A DVD player is used in this example.

Your setup may include additional devices with digital surround sound connected directly to the A/V receiver. These devices might be a DVD player plus a cable box or satellite receiver.

DVD Player	digital surround sound		DVD audio
with			input
Digital			A/V Receiver
Surround	video	TV
Sound

Case 2: A/V receiver audio from a device providing surround sound directly to the A/V receiver

1.In the Inputs > AVR menu, press to highlight the name of the A/V receiver input to control. In this example, it is the DVD input.

2.Press ENTER on the TV’s remote control.

Case 2: NetCommand setup for controlling A/V receiver switching

to the A/V receiver’s DVD input. The list contains connected inputs with names assigned during Auto Input Sensing.

3.While the text DVD is flashing, press and hold the DVD INPUT key on the A/V receiver’s remote control.

4.When a check appears next to DVD, release the

DVD INPUT key.

•If the text stops flashing before the check mark appears, repeat this step.

•To erase the IR code just “learned,” press CANCEL while the name is highlighted.

5.If finished, highlight EXIT and press ENTER or continue to set up additional A/V receiver audio sources.

Downloaded From TV-Manual.com Manuals