Insignia NS-LTDVD26-09CA manual Using the basic controls, Using your TV

08-1156 NS-LTDVD26-09CA - combined.fm Page 12 Tuesday, April 1, 2008 1:25 PM

Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo

Connecting a computer	Using the basic controls
	Turning the TV on and off
	To turn your TV on and off:
	1	Press POWER on the side of your TV or on
		the remote control. The POWER/STANDBY
		indicator turns blue.
	2	To turn off your TV, press POWER again. The
		POWER/STANDBY indicator turns red.
	Adjusting the volume
	You can adjust the volume using the controls on
	your TV's side panel or the remote control.
	To adjust the volume:
	1	Press VOL+ or VOL- to increase or decrease
		the volume.
	2	Press MUTE to mute the sound, then press
		again to restore the sound.
	Changing the video mode
	Your TV supports multiple video modes.
	To select the video mode:
	•	Press INPUT one or more times to select the
		video mode, then press ENTER. You can
		select:
		•	TV
		•	AV1
		•	AV2
To connect a computer using VGA:		•	S-Video
		•	YPBPR
1 Remove the port cover (1) from the back of
		•	DVD
your TV.
		•	HDMI
2 Plug a VGA cable (4) into the VGA port on
		•	PC (VGA)
the computer (6) and into the VGA INPUT
port on the back of your TV.	Using your TV
3 Plug an audio cable (5) into the audio jack on
the computer (6) and into the AUDIO VGA	Selecting the TV signal source
INPUT port on the back of your TV.
4 Turn on your TV.	To select the TV signal source:
5 Press INPUT, then press / to select PC.	1	Press TV MENU, then press / to
To connect to a computer or other HDMI		highlight the CHANNEL icon. The CHANNEL
		menu opens.
device using the HDMI jack:

1Remove the port cover from the back of your TV (1).

2Plug an HDMI cable (2) into the HDMI port on

	the HDMI device (3) and into the HDMI				C H A N N E L
	INPUT port on the back of your TV.			T V S o u r c e		C AT V
3 Turn on your TV.				A u t o	S c a n
				C h a n n e l N o .		1
4 Press INPUT, then press / to select				C h a n n e l L a b e l		- - - - - -
				S h o w / H i d e		H i d e
	HDMI.
	Note
	When the computer goes into standby mode, your			S e l	A d j		E x i t
						MENU
	TV turns off. If your TV does not turn on when you
	“wake” your computer, press POWER on your TV	2 Press			/ or ENTER to enter the
	or remote control.
			CHANNEL menu.
		3	Press		/ to select TV Source, then press
				/ to select Air or CATV.

• Air-VHF/UHF channels.

• CATV-Cable TV channels.

4 Press TV MENU one or more times to close the menu.

12 www.insignia-products.com