Insignia
Changing your computer's video resolution
The following example shows Windows XP settings. Even if you use a different Windows operating system, the basic setup methods are similar. For changing video resolution on a Macintosh computer, refer to your Macintosh documentation.
To change your computer's video resolution:
1Click Start, Control Panel, then
2Click the Settings tab.
3Change the screen resolution setting to a supported resolution (the ideal resolution for your TV is 1360 × 768).
4Click OK, then click Yes to save your changes.
Using the DVD player
Playing a DVD
To play a DVD:
1Press POWER to turn on your TV.
2Press INPUT, press / to select DVD, then press ENTER. You can also press DVD on the remote control to select the DVD mode. The DVD startup screen appears on the screen.
Note
Playback starts automatically if a DVD is already loaded
3Insert a DVD into the disc slot, with the label facing forward. The DVD player reads the DVD and displays the opening menu.
4Press / and / to highlight a menu item, then press ENTER.
5During playback:
•Press (Play/Pause) to pause playback. Press it again to resume playback.
•Press to
to
•Press to skip to the previous
chapter, or press to skip to the next chapter.
•To play in slow motion (forward or reverse).
•To completely stop DVD playback, press
STOP twice.
6Press to remove the DVD.
Playing an audio CD
To play an audio CD:
1Press POWER to turn on your TV.
2Press INPUT, press / to select DVD, then press ENTER. You can also press DVD on the remote control to select the DVD mode. The DVD startup screen appears on the screen.
Note
Playback starts automatically if a CD is already loaded
3Insert a CD into the disc slot, with the label facing forward.
4Press (Play/Pause). The tracks play in numerical order.
5Press STOP to stop playback, or press
(Play/Pause) to pause playback.
6Press to remove the CD.
To select a specific track for playback:
•After you insert a CD and your TV finishes reading the disc, press the number buttons to enter the track number you want to play, then press ENTER.
Using DVD repeat play
You can repeat chapters, titles, or the entire DVD.
To use repeat play:
1While the DVD is playing, press REPEAT to select what you want to repeat. You can select:
•CHAPTER (repeats the current chapter)
•TITLE (repeats the current title)
•ALL (repeats the entire DVD)
2To stop repeat playback, do one of the following:
•Press REPEAT until ALL disappears from the screen.
•Press STOP twice.
•Eject the DVD.
Using CD repeat play
You can repeat tracks or the entire CD using repeat play.
To use repeat play:
1While the CD is playing, press REPEAT to select what you want to repeat. You can select:
•ALL (repeats the current CD)
•TRACK (repeats the current track)
2To stop repeat playback, do one of the following:
20 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|