Insignia NS-P501Q-10A manual Improving the image from a game console, Adjusting the picture size

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 20 Friday, March 20, 2009 3:11 PM

•Film Mode—Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality. You can select Off or Auto.

Note

Film mode is supported in TV, Video, component video (480i/1080i), and HDMI (1080i) modes.

•Screen Burn Protection—Helps protects the screen from “burn-in.” When a screen image remains in one position for too long, the image may be permanently burned into the screen. You can select:

•Pixel Shift—Shifts the picture position every two minutes.

•Scrolling—Displays a moving pattern.

•Side Grey—When the video source is displayed in a 4:3 picture size, sets the sides of the image to gray. You can select Dark (darkens the sides) or Light (brightens the sides).

•Picture Reset—Resets the advanced picture settings to the default settings. Press ENTER to reset picture settings.

4Press or , or to adjust the setting, then press ENTER to confirm.

5Press RETURN to return to the previous menu or EXIT to close the menu.

Adjusting the picture size

To adjust the picture size:

•If you select Zoom1, Zoom2, or Wide Fit, you can adjust the position. Press or to highlight Position, then press ENTER. Press or to move the picture up or down. To reset the picture to the default setting, press or to highlight Reset, then press ENTER.

•If you select Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture. Press or to highlight Position, then press ENTER. Press or , or to move the picture. To reset the picture to the default setting, press or to highlight Reset, then press ENTER.

Picture sizes available for input sources

Input source	Picture size
ATV, Video, Component (480i, 480p)	16:9, Zoom1, Zoom2, 4:3
Component (720p), Air	16:9, Wide Fit, 4:3
DTV (1080i), Component (1080i, 1080p),	16:9, 4:3, Wide Fit, Screen Fit
HDMI (720p, 1080i, 1080p)

Notes

You can adjust and store settings for each external device you have connected to an input of your TV.

Improving the image from a game console

You can improve the image and sound from a game console by turning the Game Mode feature on or off.

Note

The Game Mode feature is only available if a game console is connected to your TV.

To turn the Game Mode feature on or off:

1Press MENU. The on-screen menu opens.

Picture	Mode	: Standard
	Contrast	: 95
Sound
	Brightness	: 45
Channel	Sharpness	: 50
Setup	Color	: 50
Input	Tint (G/R)	: G50/R50

2Press or to highlight Setup, then press ENTER to access the Setup menu.

Channel
Setup	Plug & Play
Input
	Language	: English
	Time
	Game Mode	: Off
	V-Chip
	Caption
	Energy Saving	: Off

3Press or to highlight Game Mode, then press ENTER.

4Press or to highlight Off or On, then press ENTER. When Game Mode is turned on, appears on the screen.

5Press RETURN to return to the previous menu or EXIT to close the menu.

Notes

When Game Mode is on:

•The picture mode is set to Standard and cannot be changed.

•The sound mode is set to Custom and cannot be changed. The Equalizer settings are reset to the default settings. Use the Equalizer settings to adjust the sound.

•If you open the on-screen menu, the menu shakes slightly.

20 www.insigniaproducts.com