Insignia NS-P42Q10A manual Adjusting the picture, Selecting a channel, Adjusting the volume

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 18 Friday, March 20, 2009 3:11 PM

Selecting a channel

To select a channel:

•Press CH or CH to go to the next higher or lower channel in the channel list.

•Press the number buttons to directly select a channel. For example, if you want to view channel 27, press 2, then press 7. Your TV goes to the channel in a few seconds. If you want to go to the channel quicker, enter the channel number, then press ENTER.

•Press RECALL to go to the last viewed channel.

•Press the number buttons for a main DTV channel, press —, then press the number for a DTV sub-channel to go to a digital sub-channel (if available). For example, to go to sub-channel 1 of main channel 7, press 7,

—, then 1.

Notes

•In cable mode, HD appears if your TV is receiving a digital high-definition signal. SD appears if your TV is receiving a standard-definition signal.

•You can press the number buttons to go to a channel that was skipped in the channel scanning.

Adjusting the volume

To adjust the volume:

•Press VOL – or VOL + to decrease or increase the volume.

•Press MUTE to turn off the sound. Press MUTE again (or press VOL– or VOL+) to turn the sound back on.

Displaying additional information

To display additional information:

1Press DISPLAY. Your TV displays status information, such as the channel number, type of sound, and picture and sound settings.

TV #1	Fri, Dec 19 2:05 am
DTV Air Dolby Digital	M. Spillane’s Mike Hammer	1:55 am - 2:55 am
13-1	Bonocrunch

2To close the display, press DISPLAY again or wait about 10 seconds.

Adjusting the picture

Note

Unless otherwise noted, all tasks in this section are based on using the remote control.

Adjusting the TV picture

To adjust the picture:

1Press MENU. The on-screen menu opens with Picture highlighted.

Picture	Mode	: Standard
	Contrast	: 95
Sound
	Brightness	: 45
Channel	Sharpness	: 50
Setup	Color	: 50
Input	Tint (G/R)	: G50/R50

2Press ENTER to access the Picture menu.

3Press or to highlight an option, then press ENTER to access the option.

Note

You may need to press to see all the options.

You can select:

•Mode—Selects the picture mode. You can select:

•Dynamic—Selects a high-definition picture for bright environments.

•Standard—Selects the optimal picture display for normal environments. This setting is convenient for most situations.

•Movie—Selects a comfortable picture display for dark environments.

Note

You can also press PICTURE one or more times to select the picture mode.

•Contrast—Adjusts the contrast.

•Brightness—Adjusts the brightness.

•Sharpness—Adjusts the sharpness.

•Color—Adjusts the color saturation.

•Tint (G/R)—Adjusts the intensity of red in the picture.

•Picture Options—PressENTER to open a list of advanced picture options. For more information, see “Adjusting advanced picture settings” on page 19.

•Picture Reset—Resets all picture settings to the default settings. Press ENTER to reset picture settings.

18 www.insigniaproducts.com