Insignia NS-P502Q-10A Introduction, Installing the stand, Securing your TV to a wall or cabinet

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 4 Friday, March 20, 2009 3:11 PM

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-P42Q-10A, NS-P501Q-10A, or NS-P502Q-10A represents the state of the art in plasma TV design and is designed for reliable and trouble-free performance.

Installing the stand or wall-mount bracket

Installing the stand

To install the stand:

Warnings

•Your TV screen is heavy. You should use two people to lift the screen and hold it in place.

•Make sure that you install the base securely before moving it. The stand could fall and cause serious injury.

•Always store your TV upright.

1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Secure the base to the stand with the four included screws.

Securing your TV to a wall or cabinet

Warnings

•Pushing, pulling, or climbing on your TV can cause it to fall resulting in serious injury or damage to your TV.

•For added stability, secure your TV to the wall with the anti-fall device.

•If you do not think you can install the anti-fall device, contact a professional installer.

•Be sure to use a wall anchor to secure the screw into dry wall, if necessary.

To secure your TV to a wall or cabinet:

1Attach the anti-fall device to the back of your TV with the provided M4×16 screw.

2Mount a screw (not provided) to the wall or cabinet where your TV will be set. Leave the screw head protruding 1/4" (6.35 mm).

Wall

Cabinet

4 www.insigniaproducts.com