Insignia NS-P502Q-10A, NS-P501Q-10A manual Maintaining, Troubleshooting, Cleaning the TV cabinet

Page 44

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 40 Friday, March 20, 2009 3:11 PM

Maintaining

Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.

Do not place your TV in direct sunlight or near a heat source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. Do not use the cleaning cloth that came with your TV to clean the cabinet. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the screen or cabinet with the cloth. Use a clean cloth to dry the screen or cabinet.

Cleaning the TV screen

Clean the screen with the cleaning cloth or a soft, lint-free cloth. Do not use the cleaning cloth to clean other parts of your TV.

Troubleshooting

Warning

Do not try to repair your TV yourself. Refer all service to a qualified service technician.

Problem

Remote control does not work.

Digital broadcasting screen problem.

The image is too light or too dark.

The image is too large or too small.

The visual qualities of digital channels vary.

Solution

• Make sure that there are no

obstacles between the remote

control and the remote control

sensor on the front of your TV.

• Make sure that batteries are

inserted into the remote.

• Make sure that the + and –

symbols on the batteries match the

+ and – symbols inside the battery

compartment.

• Clean the upper edge of the remote

control (transmission window).

• Check the battery terminals.

• Replace the remote control

batteries.

• Check the digital signal strength.

• Adjust the antenna.

• Adjust the brightness and contrast.

• Adjust the fine tuning.

• Adjust the Picture Size settings.

For more information, see

“Adjusting the TV picture” on

page 18.

• Press ZOOM to select a different

aspect ratio.

• The visual qualities of digital

channels may vary depending on

the original production method

(analog or digital). If the original

production method is digital, the

visual quality is high. If the original

production method is analog, the

program has been converted to

Problem

Poor picture quality.

Poor sound quality.

No picture or sound.

No sound or sound is too low at maximum volume.

Picture rolls vertically.

Your TV operates erratically.

Your TV will not turn on.

Solution

Try another channel.

Adjust the antenna.

Check all wire connections.

Try another channel.

Adjust the antenna.

Try another channel.

Press INPUT to make sure the correct video input source is selected. For more information, see “Selecting the video input source” on page 16.

Make sure that the power cord is connected to your TV and a surge protector or working power outlet. If you use a surge protector, make sure that it is turned on.

Check the antenna connections.

Press MUTE to make sure that the sound is not muted.

First, check the volume of devices connected to your TV (such as the cable or satellite TV box, DVD player, or VCR). Then, adjust the TV volume accordingly.

Check all connections.

Turn off the surge protector or unplug the power cord for 30 seconds, then turn on the surge protector or plug the power cord back in and turn on your TV.

Test the power outlet to make sure that it is working.

Screen is black and power indicator light blinks steadily.

The TV caption shows HD, but the visual quality is poor.

A distorted picture appears in the corner of the screen.

A strange sound is heard.

Pixels are visible on the screen.

The Resets all settings to the default values message appears.

digital and visual quality may be

lower.

• The visual quality is of an

SD (standard definition) grade.

If your TV is connected to a computer:

Your TV may be in power-saving mode. Move the mouse or press a keyboard key.

Check the cable connections.

If your TV is connected to an external device:

Your TV may be in power-saving mode. Press INPUT.

Turn your TV off, then on again.

Check the cable connections.

The HD (high definition) caption that appears when switching channels or when pressing DISPLAY on the remote control means the selected channel is a digital channel. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect.

If Screen Fit is selected in some external devices, a distorted picture may appear in a corner of the screen. This symptom is caused by external devices, not the TV.

This is caused by minor systems operation and is not a defect.

There may be few bright or dark pixels on the screen. These pixels have no impact on the performance of the product.

This appears when you press and hold EXIT for a several seconds. The product settings are reset to the factory defaults.

40

www.insigniaproducts.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 44
Contents User Guide Page Contents Adjusting the sound Child Safety Power lines Replacement partsSafety check Electric shock hazardHeat on the top of the plasma TV End of life directives Non-active pixelsAltitude Installing the stand To install the standIntroduction Securing your TV to a wall or cabinetInstalling a wall-mount bracket AccessoriesTo install a wall-mount bracket AccessoriesDescription Cleaning clothFront Button Back# Jack Using the remote control Installing remote control batteriesTo install remote control batteries Press the battery cover latch in, then lift the coverAiming the remote control Programming a universal remote control to work with your TVConnecting the power Installing the ferrite coreConnecting an outdoor antenna Connecting cable TVConnecting satellite TV via a satellite TV box Connecting a VCRConnect this cable to a two-way splitter To connect a VCRConnecting a DVI device Connecting a camcorder or game consoleConnecting an Hdmi device Connecting a component video device Connecting a digital audio amplifierConnecting a computer using DVI Connecting an analog audio amplifierTo set up your TV Turning on your TV for the first timePress ENTER. The Enjoy your TV screen opens Press ENTER. Your TV is ready to useTurning your TV on or off Selecting the video input sourceOn-screen menu overview Navigating the menusAdjusting the picture Adjusting the volumeAdjusting the TV picture Selecting a channelAdjusting advanced picture settings To adjust advanced picture settingsPress Enter to access the Picture Options menu On the Picture menu, press or to highlight Picture OptionsAdjusting the picture size Improving the image from a game consolePicture sizes available for input sources Input source Picture sizeAdjusting the computer image Using Energy Saving modeTo adjust the computer image To use Energy Saving modeAdjusting the sound Adjusting the soundTo adjust the sound 100 Hz, 300 Hz, 1 kHz, 3 kHz,Automatically searching for channels Removing scrambled channels from the channel listTo automatically search for channels To remove scrambled channels from the channel listFine-tuning an analog channel Opening the channel listTo open the channel list To fine-tune an analog channelReserving programs Changing a reservationTo reserve a program To change a reservationTo set up a favorite channel list Hiding channelsTo hide channels Press CH.LIST. The channel list opens with All highlightedChecking the DTV signal strength To check the DTV signal strengthViewing a favorite channel To view a favorite channelSetting or changing the password To set up a passwordTurning parental controls on or off Press or to highlight Change PIN, then press EnterSetting U.S. TV parental control levels TV content ratingsTemporarily unblocking a channel TV ratingsTo set movie levels Setting movie levelsMovie Mpaa ratings Setting Canadian TV rating levels Downloading rating informationCanadian English ratings Canadian French ratingsDownloadable U.S. Rating Customizing DTV closed captioning styles Selecting the closed captioning modeViewing closed captioning To set the clock Adjusting time settingsSetting the clock Setting the time zone Press or to highlight a time zone, then pressTurning Daylight Saving Time on or off Setting the sleep timerSetting a wake-up timer Adjusting menu settings Setup Plug & PlaySelecting the menu language To select the menu languageLabeling an input source Resetting the Plug & Play optionResetting settings to the defaults Upgrading TV software To upgrade TV softwareDuring the software upgrade, the following screen appears Troubleshooting Cleaning the TV cabinetCleaning the TV screen MaintainingSpecifications Sound output Dimensions Weight Temperature HumidityComputer display modes HDMI/DVI input NS-P42Q-10A/NS-P501Q-10AHDMI/DVI input NS-P502Q-10A NS-P502Q-10ALegal notices What does this warranty cover? How to obtain warranty service?Where is the warranty valid? What does the warranty not cover?Blank.fm Page 1 Thursday, February 12, 2009 1053 AM Blank.fm Page 1 Thursday, February 12, 2009 1053 AM 09-0100