** | ** |
** |
|
| 3. Installation Wizard |
3.4 Automatic Search
You can automatically search for satellites according to the Antenna Setting.
Please wait for finishing the Automatic Search. If you want to stop the
Automatic Search, select the OK 
button.
If the Automatic Search is stopped or finished, the selected result is automatically saved and go to the next step.
3.5 Time Setting
You can set the current time.
Press the OK 
or 
button to display the values for GMT Offset.
Select the appropriate GMT Offset value using the 
button and
press the OK 
button to set the current time. Check the current time at the bottom of the screen to see if it's correctly set up. Then select
Next using the 
button and press the OK 
button to finish Installation Wizard.
Warning: Press the EXIT 
button to save the previous input information and exit the Installation Wizard when running the Installation wizard. If you exit the Install Wizard without fully completing the setting procedures, you may not watch any broadcasting normally. In this case, you can use the Menu - Installation - Antenna Setting and Channel Search menu to configure your receiver as you like.
**
**
**
**
**
GB 16
**
**
**
**
**