** | ** |
** |
|
| Safety and Warning |
This digital satellite receiver has been manufactured to comply with international safety standards. Please read the following safety precautions carefully.
Safety Instructions and Precautions
1.MAINS SUPPLY
90 - 250V AC 50/60Hz
Operate your product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. Disconnect the receiver from the mains before you start any maintenance or installation procedures.
2.OVERLOADING
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
3.LIQUIDS
The receiver should not be exposed to any liquids such as dripping or splashing. In addition, no objects filled with liquids, such as vase, should be placed on the apparatus.
4.CLEANING
Disconnect the receiver from the wall outlet before cleaning. Use a light damp cloth (no solvents) to dust the receiver.
5.VENTILATION
The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do not stand the receiver on soft furnishings or carpets. Do not stack electronic equipment on top of the receiver.
6.ATTACHMENTS
Do not use any unsupported attachments as these may be hazardous or cause damage the receiver.
7.CONNECTION TO THE SATELLITE DISH LNB
Disconnect the receiver from the mains before connecting or disconnecting the cable from the satellite dish. Failure to do so can damage the LNB.
8.CONNECTION TO THE TV
Disconnect the receiver from the mains before connecting or disconnecting the cable from the satellite dish. Failure to do so can damage the TV.
9.EARTHING
The LNB cable must be buried in the ground. The buried cable of the system must comply with SABS 061.
**
**
**
**
**
GB 3
**
**
**
**
**