Important Safety Instructions
•Locate the receiver in an open,
•Do not impede ventilation by covering the ventilation slots (such as with magazines, curtains, tablecloth, etc.), or the receiver will overheat.
•Do not stack the receiver on top of or below other electronic devices as this can cause heat
•Do not install the receiver in any area where the temperature can be less than 40°F or more than 113°F, and do not cover it.
•Connect the power plug to an outlet having a safety ground connection. The power plug must be readily accessible so that the equipment can be easily disconnected from the AC power.
•Operate the receiver using only the type of power source indicated on the marking label. Unplug the receiver power cord by gripping the power plug, not the cord.
•Do not overload wall outlets or extension cords — this can result in a risk of fire or electrical shock.
•Never insert objects of any kind through openings into the receiver, as the objects may touch dangerous voltage points or short out parts. This could cause fire or electrical shock.
•Do not attempt to service the receiver yourself, as opening or removing covers may expose you to dangerous voltage, and will void the Limited Warranty. Refer all servicing to authorized service personnel.
•Unplug the receiver from the AC power outlet before cleaning. The receiver is still connected to the AC power whenever it is plugged in to a live power outlet, even if the receiver is “turned off” using the remote control or front panel button.
iii