Software and Channel List Update
Use the bright selection cursor and or to determine which position you want to deactivate (No). The positions which are al- ready inactive cannot be changed. If you merely want to actualise the software but want to leave the channel list, deactivate the field 'chan- nel list' and the other way round.
To carry out an update, scroll the selection cursor to 'Start' and con-
firm with . Then the receiver starts the update, and, if necessary, displays the following information on the sreen:
*** Information UFD 574 01.08.2004 ***
Dear customer,
your receiver is updated.
A software download is not necessary
Further information: www.kathrein.de
After the update, the receiver is
Not on any account switch off the receiver during the update as otherwise you will delete the entire software. In this case, the software would have to be
After the request
'show information'
you should go by the screen insert which is then displayed,
Observe all screen inserts!
After a software update, you have set the time again!
You can also call up the software updates on the internet under:
You can also find information on this procedure there.
57