Sound Settings
Adjusting the Volume
Press on the remote control of the receiver to adjust the desired volume. A bar indicating the volume is displayed on the screen.
Stereo and Dual-Channel Sound Reproduction
The sound reproduction setting is shown in the channel information,
which can be called up by pressing (depending on where the 'sound wave' icon appears
Press the yellow key to call up the audio menu for the sound and language selection. You can make the desired settings if the corresponding data are provided in the reception signal, as are e.g. language selection (sound track), Dolby Digital (5.1 CH). Select the
menu items by pressing , and make the desired settings with . Press again to exit the menu.
If subtitles are broadcast, you can select the language with in the bar 'subtitle track'. Confirm your entry by pressing .
AC 3
The receiver has an audio output for the AC 3 format. This means you can enjoy
Please observe the owner manual of your Dolby Digital unit.
In order to have the AC 3 format reproduced, make the following settings: Call up the audio menu, scroll to position 'stereo', set the receiver to '1 of 2' or '2 of 2' respectively (2 CH). Now, 'Dolby Digital/AC 3' is displayed in position 'digital output' – if broadcast correspondingly.
Only a few programme providers broadcast the AC 3 format. If no AC 3 signal can be received, you can merely make the standard mono/stereo settings or select a language which is broadcast.
24