Installation
•First of all, connect your receiver to the TV set and the antenna installation.
•Switch on the TV set.
•Select the AV programme position for the receiver connection.
•Now connect the receiver to the wall outlet.
•Switch on the receiver by pressing the red key on the remote control
•Use the keys to scroll the selection cursor to the line
'Language' and select the desired language with the keys . Confirm your entry with .
•Use the keys to scroll the selection cursor to the line 'Active Antenna' and select the desired setting with the keys . Confirm your entry with (see pages 15 and 17).
•Use the keys to scroll the selection cursor to the line 'Start Search'. Confirm your entry with .
We recommend you had the entries now saved by the receiver. Now, a search is carried out and the receiver is in the basic setting. The
The first programme of the channel list is displayed on the screen, below, a bar is displayed, informing on the programme provider, time, timer settings, programme status and programme name, provided that this information is broadcast by the programme provider. The LED indicates the programme memory number.
The reception status last set will be called up each time you switch on the receiver!
If 'bad or no signal' is displayed on the screen together with the programme last received, check whether the installation is in order and the settings of the receiver are correct. If only a few programmes are affected, this may mean a signal failure on the part of the programme provider.
Please check the time as to daylight savings time and wintertime!
6