Installation
Network Configuration
Please mind the suppor- tive information you can read in the individual menu items by pressing
!
Of course, new networks can also be added to the network configura- tion.
Refer to menu item 'antenna alignment' in the installation menu for support in aligning the antenna.
Get to 'network configuration' by pressing to call up the main
menu, and by using the keys and (plus password – if acti- vated), scroll to the submenu 'installation'. Select 'network configura-
tion' by pressing . Now, you can add or select a new network.
Consider that your installation must be set accordingly!
In the next step, e. g. scroll with the keys to a desired entry, 'area 2' or any other.
After pressing or the question whether you want to add the network is displayed on the screen.
Confirm by pressing .
The following is displayed:
You can now use the keys , and or to make the entries in the respective positions according to your receiving installation.
Press three times to exit the menu while the new station data are being stored.
Under point 'operation', you have to enter whether your active antenna is to be fed by the receiver.
Under point
47