Kathrein 9986492 Analogue menu, Selecting the standard, Audio carrier table for TV reception

TV Operation

Analogue menu

A

Calls up the TV menu

Selecting the standard

With this softkey, the following standards can be selected: B/G, D/K, I, L, M, M – jap. (Japan) and N. Refer to the audio carrier table.

In this menu, the channel setting can be changed using the cursor buttons, ◄►. In the RP menu, the receiving frequency can be changed in this manner.

Audio carrier table for TV reception

The given audio carrier frequencies are based on the video audio carrier

spacing

Standard	Audio carrier 1	Audio carrier	Audio carrier (1 +2	NICAM
	(sc1)	(sc 2)	sc)	(nicam)
B/G	5.50 MHz	5.74 MHz	sc 1: 5.50 MHz	5.85 MHz
			sc 2: 5.74 MHz
L	6.50 MHz (AM)			5.85 MHz
D/K	6.50 MHz	6.26 MHz	sc 1: 6.50 MHz	5.85 MHz
			sc 2: 6.26 MHz
I	6.00 MHz			6.552 MHz
M	4.50 MHz	4.72 MHz	sc 1: 4.50 MHz
			sc 2: 4.72 MHz
M (Japan)	4.50 MHz
N	4.50 MHz

Selecting the audio carriers

By pressing the button, the MSK 33 can be set to the following reception types:

•Audio carrier 1 (sc1)

•Audio carrier 2 (sc2)

•Stereo (sc1 + sc2)

•NICAM (nicam)

Level-dependent acoustic signal

In the function, „level beep,“ the acoustic signal is generated, whose pitch is pro- portionate to the received signal level. With this, it is possible to optimally align the receiving antenna to a transmitter.

Carrying out measurements

By pressing the button, the MSK 33 is set to analogue reception and measures the following values:

-Audio carrier spacing of TT1 (sc1) and TT2 (sc2)

-Nicam audio carrier spacing (if available)

– Nicam bit error rate (BER)

45