Kathrein MSK 33, 9986492 manual Auto Measure, Display of the check point

Auto Measure

	measurement point >48<		BACK
	!after start is point +1
	list rcl. ---setting---		edit
1 >85<		NO SETTINGS	list
	set
2 02
	3 03		point
	stop
4 04
	5 05		on/off
	6 06		start
	7 07		measure
8 08			input
9 09

ListNolistNo

Display of the check point

In the setting, AUTO MEASURE, the measuring instrument settings which are saved in the ‚Copy menu can be carried out and printed out.

For the automatic measuring sequence, the unit settings (store nr. -- / recall nr.-) which are saved in the ‚Copy menu‘ are used. Refer to the chapter “COPY Function”. Up to 100 (00…99) different series of measurements can be saved. You can assign each measurement sequence a specific check point (e.g. socket 1), but the memory positions 80...95 are occupied with DiSEqC functions at the factory.

measurement point >02< after start is point+1

set point

The upper bar of the display screen shows, which check point as- signed to the measurement sequence is called up. It can be repro- grammed via the softkey, set point, and numerical entry from 00 to

99.For each new start of measurement, the check point number is automatically increased by 1.

With „set point,“ you open the numerical entry of the check point via the numerical keypad.

Display of the entry field for the respective measurement task

list rcl.---setting---

5 >08< TsA 303.25M

edit list

stop on/off

start measure

list	5	= Measurement sequence number
rcl.	>08< = Entry of the memory position number of the meas-

urement setting after pressing the button „edit list“ setting TsA 303.25M = TV special channel analogue 303.25 MHz

After pressing this softkey, the memory position number of the measurement, which is to be carried out, can be entered in for the respective measurement sequence number.

This softkey indicates the end of the measurement sequence.

After pressing this button, the automatic measurement sequence starts. All measurement settings are carried out between the meas- urement sequence number 00 and the next STOP or between two STOP settings and afterwards the measurement results are printed out with the built-in printer.

input ListNo

After activating this softkey, the numerical entry of the list number can be carried out or the entry point (list number) selected with the cursor buttons, ▲▼.

88