FIRST INSTALLATION
LNB settings
Here use the buttons to select the LNB type used in your system. The choice is between “Universal” and
Universal:
No further input required, since all necessary frequency ranges are covered by a universal LNB.
If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was configured.
Use the buttons to select the frequency range to be changed (low, high or limit frequency).
Use the buttons or the digital input buttons to set the exact frequency for which your LNB was configured.
Test transponder
To check whether the settings that you have
made are | correct, | use | the |
| buttons |
to move | to the | “Test | transponder” | field. | |
Use the buttons to select the required transponder from the various ones listed. If your settings are correct, you will see at the top right of the screen the live signal of a channel for the currently selected transponder.
If you are not receiving a signal, check your settings again and if necessary call for expert help.
Use the buttons to select how many satellites (max. 4) you would like to receive with your reception system. The following display appears (example):
Use the buttons to select the first satellite
slot. Press to access the menu for the satellite settings. The following display appears (example):
18