ON-SCREEN DISPLAYS (OSD)
ERROR SIGNALLING
“No or bad signal” indicates that an error has occurred in the reception system or in the receiver settings, or that the transponder is not sending.
Check the Sat IF connection and the LNB configuration. If you have changed settings, compare them against the basic settings (provided you had made a note of them as suggested).
CHANNEL LIST - TV/RADIO
Also pay attention to the bars at the bottom of the
Press the button to access the channel list.
Calling this up displays the channel selection/sorting list from which you selected the last channel. At the top right you will see the selected channel list (TV or radio channels) displayed.
Press the # (blue) button to switch between the TV and radio channel lists.
To the right of it you see the current channel list sort order as selected by you.
36