Kathrein UFS 740sw First Installation One cable manual

FIRST INSTALLATION: One cable (manual)

Selection “EXR 8 Subscribers”

When a Kathrein single-cable switching matrix is used for eight users, it is essential that the LNB is set to “Universal”!

Transmission channel

Use the  buttons to select a free available transmission channel. A maximum of eight transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980, 2096).

Test connection

When you have set a free transmission channel, press the  buttons to switch to the “Test connection”

selection field and press the  button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Confirm this display with the  button. Then press the

button. You will be asked whether you wish to save the changes. Use the  buttons to select “Yes, save changes” and confirm by pressing the  button. Now press the ! (green) button.

The receiver will automatically display the menu for the channel search. Continue with the section (Execute channel search).

If no connection to the single-cable system could be established, the following display appears:

Check your settings and if necessary call for expert help.

29