Kathrein UFS 740sw Functional Scope, Display Duration of Channel Message, Display Volume BAR

SETTINGS

FUNCTIONAL SCOPE

Here you can configure the functional scope of your receiver. You can choose between “High”, “Normal” and “Low”. The following table shows which functions are available at each configuration step.

	(red) button	"(yellow) button	#(blue) button	button	button
High	Select favourites	Select options	TV/Radio	AV changeover	Channel list
Low	Not assigned	Not assigned	Not assigned	Not assigned	Programme Guide
Normal	Select favourites	Select options	TV/Radio	Not assigned	Programme Guide

DISPLAY DURATION OF CHANNEL MESSAGE

Use the  buttons to select the time after which you want the on-screen channel message display to be automatically cancelled. The selections available are “Off”, 1, 2, 3, 4, 5 or 6 seconds.

DISPLAY VOLUME BAR

Usevolume.the  buttons (On/Off) to specify whether the volume bar is displayed when adjusting the

RECEIVER FRONT DISPLAY BRIGHTNESS

Use the  buttons to set the brightness of the receiver front display. Select the most comfortable setting for the ambient lighting.

RECEIVER FRONT DISPLAY IN STANDBY

Use the  buttons to set whether the receiver front display should be switched on or off in stand-by mode (display of time).

OSD POSITION ALIGNMENT

Press the  button to align the on- screen displays on the TV screen. Now you can use the cursor buttons

() to determine the position of the on-screen display. When you have achieved the desired position, press the

button to fix the selected position.

69