Wegener Communications 4600 manual Ird, Compel, Kms, Lan, Lcd, Led, Mpeg, Ntsc, Pal, Pat, Pcr

Page 19

 

 

Unity 4600 User’s Manual

 

 

 

 

 

 

Term

Definition

 

 

 

 

 

 

 

 

Ethernet

The widely-used LAN technology specified by IEEE standard 802.3

 

 

 

 

 

 

 

 

IRD

Integrated Receiver-Decoder. A product which features a "receiver" to extract transport

 

 

 

 

streams from satellite-borne carriers and a companion "decoder" to decompress MPEG

 

 

 

elementary streams (from within said transport streams) in order to recreate the original

 

 

 

audio/video/data signals. The Unity 4600 is an IRD.

 

 

 

 

 

 

 

Keep-alives

Simple COMPEL network messages, addressed to "all", bearing date and time.These are

 

 

(COMPEL)

transmitted regularly (every 5 seconds, for example) so that IRDs may quickly and

 

 

 

continuously verify their network connection.

 

 

 

 

 

 

 

 

 

 

 

KMS

Key Management System. The sub-system within the Wegener Conditional Access system

 

 

 

that creates and ciphers the scrambling keys and then distributes them to the uplink

 

 

 

 

UMX5010 and all downlinked IRDs conveyed in a special PID within the transport stream.

 

 

 

 

 

 

 

LAN

Local area network. Your Unity 4600 may be connected to an Ethernet LAN.

 

 

 

 

 

 

 

LCD

Liquid crystal display. The front-panel screen on your Unity 4600 is a liquid crystal display.

 

 

 

 

 

 

 

LED

Light-emitting diode. The front-panel indicator lights on your Unity 4600 are LEDs

 

 

 

 

 

 

 

Mbps, kbps or Msps

Units of data transport rate - Megabits per second (1 million bits per second), kilobits per

 

 

 

second (1 thousand bits per second), or million symbols per second (1 million symbols per

 

 

 

second)

 

 

 

 

 

 

 

MPEG

Moving Picture Experts Group - refers to the method of video compression established by

 

 

 

this group. (The Unity 4600 utilizes the MPEG2 format for video.)

 

 

 

 

 

 

 

Network Protection

A non-volatile setup parameter whose value is “Shared” or “Protected” (or “not Shared”).

 

 

Mode

Similarly, each network control stream has a “Share” status field as part of the COMPEL

 

 

 

packet framing. A network control stream is considered “invalid” to the Unity 4600 if the

 

 

 

network ID in the stream differs from that of the IRD and if either the network stream or the

 

 

 

Unity 4600 are set to be “Protected”. For test purposes only, there is a generic network ID

 

 

 

that the COMPEL system may transmit which is always considered to be “valid” by all IRDs.

 

 

 

 

 

 

 

NTSC

National Television System Committee. The composite color video standard used

 

 

 

 

domestically (and in a few countries outside US) based on 525-line 59.97 Hz field rate (with

 

 

 

2:1 interlace).

 

 

 

 

 

 

 

PAL

Phase-Alternating-Line. A set of composite color video standards used worldwide (outside

 

 

 

US) which implements a line-by-line reversal of phase of one of the orthogonal color

 

 

 

 

components. For our use, all PAL signals are assumed to be 625-line 50 Hz field-rate

 

 

 

 

systems with varying chroma and luma bandwidths and color subcarrier frequencies.

 

 

 

 

 

 

 

 

PAT

Program Allocation Table. A PSI table within an MPEG transport stream which cross-

 

 

 

 

references all available programs to a PID for its PMT. This table is always present in legal

 

 

 

transport streams and must always be in the clear (not scrambled) even when Conditional

 

 

 

Access scrambling is used.

 

 

 

 

 

 

 

PCR

Program Clock Reference. A time-base signal used to synchronize the IRDs internal timing

 

 

 

to the same timing in the MPEG encoder for the received program. Multiple programs may

 

 

 

share a PCR, depending on the multiplexer used to create the final transport stream.

 

 

 

 

 

 

 

PES Stream

Packetized Elementary Stream. The MPEG designation for a compressed component of a

 

 

 

Program (such as audio or video) which includes the timing information necessary for

 

 

 

 

synchronization (e.g. - synchronizing audio to video).

 

 

 

 

 

 

 

 

PID (or Packet ID)

The unique transport stream packet identifier assigned to each constituent data stream

 

 

 

 

within the transport stream. Also, in this document, “PID” is used to designate the stream

 

 

 

itself.

 

 

 

 

 

 

 

 

 

 

 

 

www.wegener.com

800032-01 Rev. G

13

 

Image 19
Contents Unity4600 Unity 4600 User’s Manual Table of Contents Alarms and Warnings Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Manual Overview General InformationPhysical Unity 4600 OverviewFunctional DescriptionTechnical Specifications Unity 4600 SpecificationsSee See Transport In Options on SNR Audio OutputFRONT-PANEL Monitors FRONT-PANEL Email ALARM/CUEING RelaysSerial Ports Ethernet PortTransport In Options LNB DC Power Turbo PSK Receiver OPTION, Broadcom Protocol DVB-QPSK DVB-ASI Input Turbo PSK Receiver with 4-PORT Switch OptionRF Switch Input ASI Transport Input OptionSafety Summary Dtmf Glossary of Terms and AbbreviationsCOMPEL→ DPILAN IRDCompel KMSPTS PMTRAM Tmra This page intentionally left blank 800032-01 Rev. G Location and Mounting Unpacking and InspectionDesktop InstallationRack MountingTransport Unity 4600 ConnectionsOptions Rear panel Connectors ASI OUT Txdo +Txdo Rxdi + RxdiAssignments Serial Port ConfigurationConfigurations DeviceHandling RF input Installation TestingCheck Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Theory of Operation Automated recoverySummary Operation Unity 4600 Front-panel Layout Operation from Front PanelLCD Screen Relationships Installation Test Alarm/Warning ScreensRecovery Abort RF Switch BypassScreens DefaultUnit Setup HomeInterpreting LEDs LED Indicators Front-panel LED Indicator DescriptionsServices Syntax User CommandsCommand directory for Unity 4600 terminal commands Operation from Local/Remote TerminalAud1rt Same as aud1rt above Level Integer between 0 and 100 inclusive Command ends telnet sessions. Same as Quit command Time Time in seconds Lnbtst voltagerange tone Source PC device baud parity Or OCommand ends telnet sessions. Same as Exit command RD group RP group Rpath to username@addr Route PortSetlnb Rffeed LOfreq Source Not used. In legacy IRDs, this was Fade timeout Test group value No output or indications MaintenanceGeneral Troubleshooting No audio, video, or ASI outputMissing an audio, video, or ASI output while others are okay Alarms and WarningsLCD Alarm or Warning Meaning / Possible Cause Alarm and Warning DescriptionsASI transport output bears no program content because a Changes have been made on uplink transport mux No Program Allocation Table detected in input carrier or Ser pt N fail This page intentionally left blank 800032-01 Rev. G 624-0294, or e-mailservice@wegener.com WarrantyTechnical Support Customer Service ? Other Screens? @ Menu Up? Press ESC Home? Hold In ESC Info Screens? Other Screens? @ Application Current Menu Up? Press ESC Menu Screens Misc Setups Press EnterUnit Label Unity Parameter ScreensChange? Press Enter ?Other Screens? @This page intentionally left blank 800032-01 Rev. G Index PID LAN LCDSDT Uneven mechanical loadingThis page intentionally left blank
Related manuals
Manual 70 pages 45.58 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.